How to use the hook to ensure the safety of the crane
In the crane industry, there are many equipment, which are very important when used. The crane has many accessories, such as hooks, wire ropes, etc. The organic combination of these accessories with the crane allows the lifting operation to be completed well. For example, hook, this kind of accessories is very simple when produced and is very practical to use. So how does the horse hook work?
When using two hooks to work at the same time, the angle between the two hook surfaces shall not be greater than 90 degrees. The hooks and rings used in lifting and hoisting operations must have smooth surfaces and must not have defects such as breaks, peeling, marks, sharp angles, joints and cracks; hooks and rings are not allowed to be used overloaded; hooks should be flexible to rotate; hooks and rings after rewelding are not allowed; hooks and rings should not be used; the tilt angle of the hook should not exceed 10 degrees; when connecting hooks to heavy objects, the position and force of the hook must be ensured to meet the requirements.
For more knowledge about hooks, you can check it on our website.
In the crane industry, there are many equipment, which are very important when used. The crane has many accessories, such as hooks, wire ropes, etc. The organic combination of these accessories with the crane allows the lifting operation to be completed well. For example, hook, this kind of accessories is very simple when produced and is very practical to use. So how does the horse hook work?
When using two hooks to work at the same time, the angle between the two hook surfaces shall not be greater than 90 degrees. The hooks and rings used in lifting and hoisting operations must have smooth surfaces and must not have defects such as breaks, peeling, marks, sharp angles, joints and cracks; hooks and rings are not allowed to be used overloaded; hooks should be flexible to rotate; hooks and rings after rewelding are not allowed; hooks and rings should not be used; the tilt angle of the hook should not exceed 10 degrees; when connecting hooks to heavy objects, the position and force of the hook must be ensured to meet the requirements.
For more knowledge about hooks, you can check it on our website.
In the crane industry, there are many equipment, which are very important when used. The crane has many accessories, such as hooks, wire ropes, etc. The organic combination of these accessories with the crane allows the lifting operation to be completed well. For example, hook, this kind of accessories is very simple when produced and is very practical to use. So how does the horse hook work?
When using two hooks to work at the same time, the angle between the two hook surfaces shall not be greater than 90 degrees. The hooks and rings used in lifting and hoisting operations must have smooth surfaces and must not have defects such as breaks, peeling, marks, sharp angles, joints and cracks; hooks and rings are not allowed to be used overloaded; hooks should be flexible to rotate; hooks and rings after rewelding are not allowed; hooks and rings should not be used; the tilt angle of the hook should not exceed 10 degrees; when connecting hooks to heavy objects, the position and force of the hook must be ensured to meet the requirements.
For more knowledge about hooks, you can check it on our website.
Inquiry
Please leave us your requirements, we will contact you soon.