News

　　In the maintenance and maintenance of container slings, the following aspects need to be paid attention to to ensure their stable operation:

　　Inspect and maintenance cycle: The maintenance cycle of container slings should be at least once a year, and the inspection cycle of important components such as rotary locks, transmission rods, etc. can be shortened to 6 months or 3 months. The specific cycle must be determined based on the frequency of equipment usage, usage environment and importance of equipment.

　　Luction and cleaning: Regularly lubricate the rotating parts of the container spreader, such as the locking mechanism, transmission rod, etc., to maintain its flexibility. At the same time, clean the equipment regularly to clean dust and dirt, keeping the equipment clean and dry.

　　Surface and connection parts inspection: Check whether the surface of the spreader has obvious deformation, cracks, rust and wear, whether the connection part is firm, whether the joint bolts are loose, and whether the pins and buckles are intact. For problems found, timely measures should be taken to resolve them.

　　Load test and inspection spreader mark: conduct appropriate load test within a reasonable safety range to check the safety and reliability of the spreader. At the same time, check whether the markings of the spreader are standard, clear and complete. If it is damaged or unclear, it should be re-marked.

　　Maintenance of wire ropes: Wire ropes should be used in accordance with regulations to avoid delays, throwing, etc., and prevent shortening of their service life. Once there is rust, dust, etc. on the wire rope, it should be cleaned in time. Lubricate every once in a while and place it in a clean and dry place.

　　Scrap and replacement: When the spreader is seriously damaged or malfunctioned, the equipment should be scrapped and replaced in time to avoid safety accidents.

　　Through the above maintenance and maintenance measures, the long-term and stable operation of the container spreader can be ensured, and the efficiency and safety of the equipment can be improved.

　　In the maintenance and maintenance of container slings, the following aspects need to be paid attention to to ensure their stable operation:

　　Inspect and maintenance cycle: The maintenance cycle of container slings should be at least once a year, and the inspection cycle of important components such as rotary locks, transmission rods, etc. can be shortened to 6 months or 3 months. The specific cycle must be determined based on the frequency of equipment usage, usage environment and importance of equipment.

　　Luction and cleaning: Regularly lubricate the rotating parts of the container spreader, such as the locking mechanism, transmission rod, etc., to maintain its flexibility. At the same time, clean the equipment regularly to clean dust and dirt, keeping the equipment clean and dry.

　　Surface and connection parts inspection: Check whether the surface of the spreader has obvious deformation, cracks, rust and wear, whether the connection part is firm, whether the joint bolts are loose, and whether the pins and buckles are intact. For problems found, timely measures should be taken to resolve them.

　　Load test and inspection spreader mark: conduct appropriate load test within a reasonable safety range to check the safety and reliability of the spreader. At the same time, check whether the markings of the spreader are standard, clear and complete. If it is damaged or unclear, it should be re-marked.

　　Maintenance of wire ropes: Wire ropes should be used in accordance with regulations to avoid delays, throwing, etc., and prevent shortening of their service life. Once there is rust, dust, etc. on the wire rope, it should be cleaned in time. Lubricate every once in a while and place it in a clean and dry place.

　　Scrap and replacement: When the spreader is seriously damaged or malfunctioned, the equipment should be scrapped and replaced in time to avoid safety accidents.

　　Through the above maintenance and maintenance measures, the long-term and stable operation of the container spreader can be ensured, and the efficiency and safety of the equipment can be improved.