What should we pay attention to when storing lifting equipment?
1. The use, maintenance and storage of lifting and lifting slings should be subject to a dedicated person, especially mechanical damage to the suspenders and chemical or high-temperature damage. The safety and technical performance of lifting and lifting slings should be inspected regularly.
2. The lifting slings should be stored on a special tool holder, and the relevant markings should be clear and conspicuous so that the operator can identify and collect them, and should not be mixed.
3. The lifting belt should be stored in a dry place to avoid ultraviolet radiation and close to heat sources. After use, you should enter the seat according to the sign on the tool holder, and mixed placement is prohibited.
4. Commonly used suspenders should be used and stored within a certain temperature range. Used under low temperature and humid conditions will freeze the suspender, thereby reducing the flexibility and wear of the suspender.
What are the safety operating procedures for lifting and lifting equipment?
1. The appropriate hook group must be selected based on the weight of the hanging object and the switch.
2. It is strictly forbidden to repair welding or drill holes on the hook, and the surface of the hook must be kept smooth and free of cracks.
3. When the hook occurs in the following situations, it is strictly forbidden to use it, such as: the cross-section wear reaches 10% of the original size, the hook opening size increases by 15% compared with the original size, the torsional deformation exceeds 10%, and the dangerous section or neck plastic deformation.
4. The newly purchased hook group should check its certificate of conformity before use and conduct a trial lifting. It can only be put into use after confirming that it is safe.
5. The horizontal angle of the hook group should be greater than 45°, and the length of the braided section shall not be less than 20 times the diameter of the wire rope, and shall not be less than 300mm.
6. When using the snap ring, it is strictly forbidden to apply lateral force. Before lifting, check whether the sealing pin is tightened.
7. The clamping ring must not have cracks or deformation, and must not be welded and repaired.
8. When the following situations occur in the wire rope, it is strictly forbidden to use, such as: the speed of wire breaking increases during strand breakage or use, the wear or corrosion of the wire on the surface of the wire rope reaches more than 40% of the surface wire diameter, and the diameter of the wire rope is reduced by 7%-10%.
1. The use, maintenance and storage of lifting and lifting slings should be subject to a dedicated person, especially mechanical damage to the suspenders and chemical or high-temperature damage. The safety and technical performance of lifting and lifting slings should be inspected regularly.
2. The lifting slings should be stored on a special tool holder, and the relevant markings should be clear and conspicuous so that the operator can identify and collect them, and should not be mixed.
3. The lifting belt should be stored in a dry place to avoid ultraviolet radiation and close to heat sources. After use, you should enter the seat according to the sign on the tool holder, and mixed placement is prohibited.
4. Commonly used suspenders should be used and stored within a certain temperature range. Used under low temperature and humid conditions will freeze the suspender, thereby reducing the flexibility and wear of the suspender.
What are the safety operating procedures for lifting and lifting equipment?
1. The appropriate hook group must be selected based on the weight of the hanging object and the switch.
2. It is strictly forbidden to repair welding or drill holes on the hook, and the surface of the hook must be kept smooth and free of cracks.
3. When the hook occurs in the following situations, it is strictly forbidden to use it, such as: the cross-section wear reaches 10% of the original size, the hook opening size increases by 15% compared with the original size, the torsional deformation exceeds 10%, and the dangerous section or neck plastic deformation.
4. The newly purchased hook group should check its certificate of conformity before use and conduct a trial lifting. It can only be put into use after confirming that it is safe.
5. The horizontal angle of the hook group should be greater than 45°, and the length of the braided section shall not be less than 20 times the diameter of the wire rope, and shall not be less than 300mm.
6. When using the snap ring, it is strictly forbidden to apply lateral force. Before lifting, check whether the sealing pin is tightened.
7. The clamping ring must not have cracks or deformation, and must not be welded and repaired.
8. When the following situations occur in the wire rope, it is strictly forbidden to use, such as: the speed of wire breaking increases during strand breakage or use, the wear or corrosion of the wire on the surface of the wire rope reaches more than 40% of the surface wire diameter, and the diameter of the wire rope is reduced by 7%-10%.
1. The use, maintenance and storage of lifting and lifting slings should be subject to a dedicated person, especially mechanical damage to the suspenders and chemical or high-temperature damage. The safety and technical performance of lifting and lifting slings should be inspected regularly.
2. The lifting slings should be stored on a special tool holder, and the relevant markings should be clear and conspicuous so that the operator can identify and collect them, and should not be mixed.
3. The lifting belt should be stored in a dry place to avoid ultraviolet radiation and close to heat sources. After use, you should enter the seat according to the sign on the tool holder, and mixed placement is prohibited.
4. Commonly used suspenders should be used and stored within a certain temperature range. Used under low temperature and humid conditions will freeze the suspender, thereby reducing the flexibility and wear of the suspender.
What are the safety operating procedures for lifting and lifting equipment?
1. The appropriate hook group must be selected based on the weight of the hanging object and the switch.
2. It is strictly forbidden to repair welding or drill holes on the hook, and the surface of the hook must be kept smooth and free of cracks.
3. When the hook occurs in the following situations, it is strictly forbidden to use it, such as: the cross-section wear reaches 10% of the original size, the hook opening size increases by 15% compared with the original size, the torsional deformation exceeds 10%, and the dangerous section or neck plastic deformation.
4. The newly purchased hook group should check its certificate of conformity before use and conduct a trial lifting. It can only be put into use after confirming that it is safe.
5. The horizontal angle of the hook group should be greater than 45°, and the length of the braided section shall not be less than 20 times the diameter of the wire rope, and shall not be less than 300mm.
6. When using the snap ring, it is strictly forbidden to apply lateral force. Before lifting, check whether the sealing pin is tightened.
7. The clamping ring must not have cracks or deformation, and must not be welded and repaired.
8. When the following situations occur in the wire rope, it is strictly forbidden to use, such as: the speed of wire breaking increases during strand breakage or use, the wear or corrosion of the wire on the surface of the wire rope reaches more than 40% of the surface wire diameter, and the diameter of the wire rope is reduced by 7%-10%.
Inquiry
Please leave us your requirements, we will contact you soon.