News

　　The liftinghook group is a set of spreaders used for lifting equipment. In addition to the load-bearing capacity of the lifting equipment itself, the hooks in the lifting unit are also key. When lifting goods with a crane, the hook group should be debugged according to the weight of the specific goods.

　　lifting hook, which can not only reduce damage to the hook, but also reduce waste of hooks. Therefore, what are the connection methods when using hook sets?

　　The hook groups are divided into long hook short hangers and short hook short hangers. The long hook and short hanger is a hook with pulley hanging on a single-character shaft, and the hook is a special long hook. The short hook and long hanger separates the hook beam from the pulley shaft and is arranged up and down, and the hook is an ordinary hook.

　　When the lifting is the same, the shape size of the long hook and short hanger is smaller than that of the short hanger, thereby increasing the effective lifting height of the crane. The biggest advantages of long hook and short hanger. But the pulleys on the short long hook should be arranged symmetrically, so the number of pulleys should be even.

　　The lateral dimension is larger, especially when the lifting weight is larger and more pulleys need to be installed, the lateral dimension is larger, which makes the bending moment of the hook beam too large and the self-weight increases. Therefore, long hooks and short hangers are generally only suitable for bridge cranes with smaller loads and fewer pulley sets.

　　Short hook hangers have not had the above disadvantages, so they have been widely used.

　　Depending on the usage, there are also a variety of styles to choose from. Commonly used ones include shackles, rings, rings, S hooks, etc. For some heavy goods, multiple hooks can be installed during lifting to reduce the pressure on the hook and reduce damage to the hook. Before use, various hooks in the hook group should be inspected so that they can be found to be damaged in time and replaced or repaired in time.

　　The above is an introduction to some connection methods when using lifting hooks. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!

　　The liftinghook group is a set of spreaders used for lifting equipment. In addition to the load-bearing capacity of the lifting equipment itself, the hooks in the lifting unit are also key. When lifting goods with a crane, the hook group should be debugged according to the weight of the specific goods.

　　lifting hook, which can not only reduce damage to the hook, but also reduce waste of hooks. Therefore, what are the connection methods when using hook sets?

　　The hook groups are divided into long hook short hangers and short hook short hangers. The long hook and short hanger is a hook with pulley hanging on a single-character shaft, and the hook is a special long hook. The short hook and long hanger separates the hook beam from the pulley shaft and is arranged up and down, and the hook is an ordinary hook.

　　When the lifting is the same, the shape size of the long hook and short hanger is smaller than that of the short hanger, thereby increasing the effective lifting height of the crane. The biggest advantages of long hook and short hanger. But the pulleys on the short long hook should be arranged symmetrically, so the number of pulleys should be even.

　　The lateral dimension is larger, especially when the lifting weight is larger and more pulleys need to be installed, the lateral dimension is larger, which makes the bending moment of the hook beam too large and the self-weight increases. Therefore, long hooks and short hangers are generally only suitable for bridge cranes with smaller loads and fewer pulley sets.

　　Short hook hangers have not had the above disadvantages, so they have been widely used.

　　Depending on the usage, there are also a variety of styles to choose from. Commonly used ones include shackles, rings, rings, S hooks, etc. For some heavy goods, multiple hooks can be installed during lifting to reduce the pressure on the hook and reduce damage to the hook. Before use, various hooks in the hook group should be inspected so that they can be found to be damaged in time and replaced or repaired in time.

　　The above is an introduction to some connection methods when using lifting hooks. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!