How often should packing lifting equipment be inspected?
Packing spreaders are generally inspected every six months. If the frequency of use is high or the use environment is poor, check it every three months to see if it needs to be repaired or replaced.
The use and management of boxing spreaders is also an important aspect of it, because it is related to the stable service life of its material transportation. So what are its specific contents? The following editor will explain it to you.
1. When simulating the friction coefficient, relevant management systems and methods must be formulated, as well as some rules and regulations, so as to ensure standardized management and reasonable use.
2. Make the conveyor belt safe. Due to a belt breakage accident in a large-angle belt conveyor, it will harm the conveyor belt with a higher specification (strength) size. People with a higher belt strength should be very familiar with the spreader and understand its scrapping standards.
3. The selected sling must be appropriately sagged, and the greater the sag, it is conveyed when approaching the roller set, otherwise it will never be used.
4. The sling must be inspected before use. It can only be put into use if the inspection is passed. 5. During use, damage should be avoided. If necessary, a certain amount should be taken. 6. After the sling is used up, it should be put back in place and should not be placed randomly.
7. Conduct regular inspections of the spreader, promptly solve problems in the spreader, and clean up safety hazards.
The above is an introduction to how often it takes to check the boxing spreader. You can learn about it! If you have any questions or needs, please contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Packing spreaders are generally inspected every six months. If the frequency of use is high or the use environment is poor, check it every three months to see if it needs to be repaired or replaced.
The use and management of boxing spreaders is also an important aspect of it, because it is related to the stable service life of its material transportation. So what are its specific contents? The following editor will explain it to you.
1. When simulating the friction coefficient, relevant management systems and methods must be formulated, as well as some rules and regulations, so as to ensure standardized management and reasonable use.
2. Make the conveyor belt safe. Due to a belt breakage accident in a large-angle belt conveyor, it will harm the conveyor belt with a higher specification (strength) size. People with a higher belt strength should be very familiar with the spreader and understand its scrapping standards.
3. The selected sling must be appropriately sagged, and the greater the sag, it is conveyed when approaching the roller set, otherwise it will never be used.
4. The sling must be inspected before use. It can only be put into use if the inspection is passed. 5. During use, damage should be avoided. If necessary, a certain amount should be taken. 6. After the sling is used up, it should be put back in place and should not be placed randomly.
7. Conduct regular inspections of the spreader, promptly solve problems in the spreader, and clean up safety hazards.
The above is an introduction to how often it takes to check the boxing spreader. You can learn about it! If you have any questions or needs, please contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Packing spreaders are generally inspected every six months. If the frequency of use is high or the use environment is poor, check it every three months to see if it needs to be repaired or replaced.
The use and management of boxing spreaders is also an important aspect of it, because it is related to the stable service life of its material transportation. So what are its specific contents? The following editor will explain it to you.
1. When simulating the friction coefficient, relevant management systems and methods must be formulated, as well as some rules and regulations, so as to ensure standardized management and reasonable use.
2. Make the conveyor belt safe. Due to a belt breakage accident in a large-angle belt conveyor, it will harm the conveyor belt with a higher specification (strength) size. People with a higher belt strength should be very familiar with the spreader and understand its scrapping standards.
3. The selected sling must be appropriately sagged, and the greater the sag, it is conveyed when approaching the roller set, otherwise it will never be used.
4. The sling must be inspected before use. It can only be put into use if the inspection is passed. 5. During use, damage should be avoided. If necessary, a certain amount should be taken. 6. After the sling is used up, it should be put back in place and should not be placed randomly.
7. Conduct regular inspections of the spreader, promptly solve problems in the spreader, and clean up safety hazards.
The above is an introduction to how often it takes to check the boxing spreader. You can learn about it! If you have any questions or needs, please contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Inquiry
Please leave us your requirements, we will contact you soon.