News

　　Container spreadersUnder general circumstances, inspections are required every six months. If they are used frequently or have poor use environments, they must be inspected every three months to see if they need to be repaired or replaced.

　　Container spreader is also an important aspect of it, because it is related to its service life. So what are its specific contents? The following editor will explain it to you.

　　1. Formulate relevant management systems and methods, as well as several rules and regulations, and ensure standardized management and reasonable use.

　　2. People who use this spreader should be very familiar with the spreader and understand its scrapping standards.

　　3. The selected sling must be appropriate, otherwise it will definitely not be used.

　　4. The sling must be inspected before use and can only be put into use after passing the inspection.

　　5. During use, spreaders should be damaged, and certain protective measures should be taken if necessary.

　　6. After using up, the sling should be put back in its original position and should not be placed randomly.

　　The above is some related contents for the inspection of packing spreaders. When you use them normally, you should pay attention to regular inspections of the spreaders, solve the problems existing in the spreaders in a timely manner, and eliminate safety hazards.

　　Container spreadersUnder general circumstances, inspections are required every six months. If they are used frequently or have poor use environments, they must be inspected every three months to see if they need to be repaired or replaced.

　　Container spreader is also an important aspect of it, because it is related to its service life. So what are its specific contents? The following editor will explain it to you.

　　1. Formulate relevant management systems and methods, as well as several rules and regulations, and ensure standardized management and reasonable use.

　　2. People who use this spreader should be very familiar with the spreader and understand its scrapping standards.

　　3. The selected sling must be appropriate, otherwise it will definitely not be used.

　　4. The sling must be inspected before use and can only be put into use after passing the inspection.

　　5. During use, spreaders should be damaged, and certain protective measures should be taken if necessary.

　　6. After using up, the sling should be put back in its original position and should not be placed randomly.

　　The above is some related contents for the inspection of packing spreaders. When you use them normally, you should pay attention to regular inspections of the spreaders, solve the problems existing in the spreaders in a timely manner, and eliminate safety hazards.