News

　　The elevator often uses semi-closed hook sets, and the elevator's hook sets are mainly used for roller-skating and other components suspended on the wire rope of the lifting mechanism. The main components of the hook group are hooks, pulleys, pulley shafts, and bearings.

　　semi-enclosed hook group has to bear a lot of pressure during work and is often subject to stress impact. Therefore, the materials used in the lifting hook group generally have good performance, especially the toughness, such as carbon steel, which are commonly used in the lifting hook group. The hook device is one of the important components of lifting equipment. It can be divided into two forms: forged hook and hook plate. When purchasing, consumers must choose qualified products and products that have been tested by all safety technologies. Safety is crucial when using them.

　　The hook group can be classified from different angles, including rings, rings, shackles, etc., with novel design, safe and reliable, and excellent quality. The semi-enclosed hook group has a wide range of use, and has already gained a place in factories, mining, petroleum, chemical and other industries, and has a good prospect.

　　During the use of semi-closed hook sets, the wire rope often encounters torque, which leads to the tendency of twisting of the hook assembly. Why does this problem occur?

　　First, no matter which type of wire rope, a torque will be generated when it is subjected to force, which is inevitable. In addition to their own reasons, the wire rope will also be affected by external forces such as wind or manpower.

　　In this case, the lifting must be stopped and the lifted goods must be put down to avoid danger.

　　The above is the reason and response measures for the semi-closed hook group to reverse. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!

　　The elevator often uses semi-closed hook sets, and the elevator's hook sets are mainly used for roller-skating and other components suspended on the wire rope of the lifting mechanism. The main components of the hook group are hooks, pulleys, pulley shafts, and bearings.

　　semi-enclosed hook group has to bear a lot of pressure during work and is often subject to stress impact. Therefore, the materials used in the lifting hook group generally have good performance, especially the toughness, such as carbon steel, which are commonly used in the lifting hook group. The hook device is one of the important components of lifting equipment. It can be divided into two forms: forged hook and hook plate. When purchasing, consumers must choose qualified products and products that have been tested by all safety technologies. Safety is crucial when using them.

　　The hook group can be classified from different angles, including rings, rings, shackles, etc., with novel design, safe and reliable, and excellent quality. The semi-enclosed hook group has a wide range of use, and has already gained a place in factories, mining, petroleum, chemical and other industries, and has a good prospect.

　　During the use of semi-closed hook sets, the wire rope often encounters torque, which leads to the tendency of twisting of the hook assembly. Why does this problem occur?

　　First, no matter which type of wire rope, a torque will be generated when it is subjected to force, which is inevitable. In addition to their own reasons, the wire rope will also be affected by external forces such as wind or manpower.

　　In this case, the lifting must be stopped and the lifted goods must be put down to avoid danger.

　　The above is the reason and response measures for the semi-closed hook group to reverse. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!