News

　　Spreading tools are divided into wire rope spreaders, synthetic fiber suspenders and chain spreaders. The structure and dimensions of rope slings have been standardized. There are usually a variety of slings such as single-limb slings, double-limb slings, triple-limb slings, and four-limb slings. It can also be said to be a sling composed of a steel wire rope and a sling of the same nominal size.

　　Holding joints are the key factors affecting lifting and lifting operations. There are now three main forms: plug-in, cast, and crimping. The main methods of manufacturing conventional spreaders include casting method and welding method. The welding processes include friction stir welding, brazing, manual arc welding, electron beam welding, etc. In addition, the manufacturing method of the spreader joint also includes metal bonding, split forging and welding.

　　The loads borne by the sling joint are mainly huge unstable loads, and the main failure form of the sling joint is fatigue failure. The sheath of the spreader joint is prone to fatigue damage, and fatigue cracks are prone to surface and inside, and breaks are prone to cracks after the cracks are propagated. Especially when stress is concentrated, the tongue is sensitive to stress and has a small force area, which is particularly prone to fatigue damage.

　　The above is an introduction to the performance of the spreader joint that will affect the container spreader. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!

　　Spreading tools are divided into wire rope spreaders, synthetic fiber suspenders and chain spreaders. The structure and dimensions of rope slings have been standardized. There are usually a variety of slings such as single-limb slings, double-limb slings, triple-limb slings, and four-limb slings. It can also be said to be a sling composed of a steel wire rope and a sling of the same nominal size.

　　Holding joints are the key factors affecting lifting and lifting operations. There are now three main forms: plug-in, cast, and crimping. The main methods of manufacturing conventional spreaders include casting method and welding method. The welding processes include friction stir welding, brazing, manual arc welding, electron beam welding, etc. In addition, the manufacturing method of the spreader joint also includes metal bonding, split forging and welding.

　　The loads borne by the sling joint are mainly huge unstable loads, and the main failure form of the sling joint is fatigue failure. The sheath of the spreader joint is prone to fatigue damage, and fatigue cracks are prone to surface and inside, and breaks are prone to cracks after the cracks are propagated. Especially when stress is concentrated, the tongue is sensitive to stress and has a small force area, which is particularly prone to fatigue damage.

　　The above is an introduction to the performance of the spreader joint that will affect the container spreader. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!