News

The lifting hook group is a set of spreaders used for lifting equipment. The weight of goods that the lifting equipment can lift is not only determined by the load-bearing capacity of the lifting equipment itself, but also the hooks in the lifting group are also key. When lifting goods with a crane, the hook group should be adjusted according to the weight of the specific goods.

Lifting the hook can not only reduce damage to the hook, but also reduce the waste of the hook. Therefore, what are the connection methods when using a hook set?

The hook group is divided into long hook and short hanger and short hook and short hanger. The long hook and short hanger is to hang a hook with a pulley on a single shaft, and the hook is a special long hook. The short hook and long hanger separate the hook beam and the pulley shaft and arrange them up and down. The hook is an ordinary hook.

When the lifting capacity is the same, the outer dimensions of the long hook and short pylon are smaller than those of the short pylon, thus increasing the effective lifting height of the crane. The biggest advantage of long hook and short hanger. But the pulleys on the short long hook should be arranged symmetrically, so the number of pulleys should be an even number.

The lateral dimensions are larger, especially when the lifting capacity is larger and more pulleys need to be installed, the lateral dimensions become even larger, causing the bending moment of the hook beam to be too large and the dead weight to increase. Therefore, long hooks and short pylons are generally only suitable for bridge cranes with smaller loads and fewer pulley blocks.

The short hook hanger has been widely used because it does not have the above shortcomings.

Depending on the use situation, there are many styles of hook sets to choose from. Commonly used ones include shackles, rings, rings, S hooks, etc. For some heavy goods, multiple hooks can be installed during lifting, thereby reducing the pressure on the hook and reducing damage to the hook. Various hooks in the hook group should be inspected before use so that damage can be discovered in time and replaced or repaired in time.

The lifting hook group is a set of spreaders used for lifting equipment. The weight of goods that the lifting equipment can lift is not only determined by the load-bearing capacity of the lifting equipment itself, but also the hooks in the lifting group are also key. When lifting goods with a crane, the hook group should be adjusted according to the weight of the specific goods.

Lifting the hook can not only reduce damage to the hook, but also reduce the waste of the hook. Therefore, what are the connection methods when using a hook set?

The hook group is divided into long hook and short hanger and short hook and short hanger. The long hook and short hanger is to hang a hook with a pulley on a single shaft, and the hook is a special long hook. The short hook and long hanger separate the hook beam and the pulley shaft and arrange them up and down. The hook is an ordinary hook.

When the lifting capacity is the same, the outer dimensions of the long hook and short pylon are smaller than those of the short pylon, thus increasing the effective lifting height of the crane. The biggest advantage of long hook and short hanger. But the pulleys on the short long hook should be arranged symmetrically, so the number of pulleys should be an even number.

The lateral dimensions are larger, especially when the lifting capacity is larger and more pulleys need to be installed, the lateral dimensions become even larger, causing the bending moment of the hook beam to be too large and the dead weight to increase. Therefore, long hooks and short pylons are generally only suitable for bridge cranes with smaller loads and fewer pulley blocks.

The short hook hanger has been widely used because it does not have the above shortcomings.

Depending on the use situation, there are many styles of hook sets to choose from. Commonly used ones include shackles, rings, rings, S hooks, etc. For some heavy goods, multiple hooks can be installed during lifting, thereby reducing the pressure on the hook and reducing damage to the hook. Various hooks in the hook group should be inspected before use so that damage can be discovered in time and replaced or repaired in time.