News

　　As we all know, the hook group is a common spreader in lifting machinery. The hook is often suspended on the wire rope of the hoisting mechanism with the help of pulleys and other components. There are two common types of hooks, single hook and double hook. The single hook is a commonly used hanging hook with a simple structure and easy use. There are two types of single hooks: a threaded straight handle single hook and a loop single hook. The threaded part is connected to the hanger, and the loop is used to directly connect to the wire rope. The force of the double hook is symmetrical and the material of the hook body is used, but it is not as convenient to use as the single hook. How to use the hook set specifically?

　　When using the hook group, an operator is required to operate it. From installation to use, it needs to be carried out in accordance with the specifications. So do you know how to use the fully enclosed hook group correctly? Here is a detailed introduction:

　　1. Before using the hook set, make sure it is produced by a regular manufacturer and has a certificate of conformity. It cannot be put into use blindly. The opening degree, weighing and other indicators must be strictly inspected.

　　2. Check the rated lifting capacity marked on the hook, which must not be less than the actual lifting capacity. If there is no mark or the lifting capacity mark is unclear, the rated lifting capacity should be determined again and through compliance testing.

　　3. Special hooks used on lifting machinery have high requirements. They must ensure that their surfaces are smooth and free of defects such as peeling, scratches, sharp angles, seams, and cracks.

　　4. Clean the three dangerous sections of the hook with kerosene and use a magnifying glass to see if there are any cracks. The plate hook should be inspected for price difference and pin wear.

　　5. During the use of the hook set, pay attention to observation and inspection to check whether there are any hidden dangers such as deformation, cracks, cross-sections, etc. Do not overweight in an appropriate manner to avoid shortening the service life of the fully enclosed hook set.

　　As we all know, the hook group is a common spreader in lifting machinery. The hook is often suspended on the wire rope of the hoisting mechanism with the help of pulleys and other components. There are two common types of hooks, single hook and double hook. The single hook is a commonly used hanging hook with a simple structure and easy use. There are two types of single hooks: a threaded straight handle single hook and a loop single hook. The threaded part is connected to the hanger, and the loop is used to directly connect to the wire rope. The force of the double hook is symmetrical and the material of the hook body is used, but it is not as convenient to use as the single hook. How to use the hook set specifically?

　　When using the hook group, an operator is required to operate it. From installation to use, it needs to be carried out in accordance with the specifications. So do you know how to use the fully enclosed hook group correctly? Here is a detailed introduction:

　　1. Before using the hook set, make sure it is produced by a regular manufacturer and has a certificate of conformity. It cannot be put into use blindly. The opening degree, weighing and other indicators must be strictly inspected.

　　2. Check the rated lifting capacity marked on the hook, which must not be less than the actual lifting capacity. If there is no mark or the lifting capacity mark is unclear, the rated lifting capacity should be determined again and through compliance testing.

　　3. Special hooks used on lifting machinery have high requirements. They must ensure that their surfaces are smooth and free of defects such as peeling, scratches, sharp angles, seams, and cracks.

　　4. Clean the three dangerous sections of the hook with kerosene and use a magnifying glass to see if there are any cracks. The plate hook should be inspected for price difference and pin wear.

　　5. During the use of the hook set, pay attention to observation and inspection to check whether there are any hidden dangers such as deformation, cracks, cross-sections, etc. Do not overweight in an appropriate manner to avoid shortening the service life of the fully enclosed hook set.