News

The role of container door cranes is self-evident and is of great help to the economic development of terminals. Container door cranes are of great help in handling cargo and loading and unloading equipment at the terminal, improving efficiency. Among them, the hook is an important component and relies on the hook to work. The selection requirements for the container door machine hook are very high.

The surface of the hook should be smooth and clean, without peeling, sharp angles, hair cracks, etc. Cast hooks must not be used. During use, it should be inspected, repaired and scrapped according to relevant requirements. The hook material should be low carbon structural steel or low carbon alloy steel. The hook material affects the safety of use. The inspection of the hook is very important, and the inspection load is determined according to national standards. After the hook is removed from the inspection load, the increase in opening should not exceed 0.25% of the original opening in the absence of any obvious defects or changes. The hook should be able to reliably support 2 times the test load without falling off.

In short, the quality of the container door machine hook will affect the safety of use. The performance of the hook must be ensured to meet the needs of production. If cracks or defects appear during operation, they need to be replaced in time to avoid damage.

The role of container door cranes is self-evident and is of great help to the economic development of terminals. Container door cranes are of great help in handling cargo and loading and unloading equipment at the terminal, improving efficiency. Among them, the hook is an important component and relies on the hook to work. The selection requirements for the container door machine hook are very high.

The surface of the hook should be smooth and clean, without peeling, sharp angles, hair cracks, etc. Cast hooks must not be used. During use, it should be inspected, repaired and scrapped according to relevant requirements. The hook material should be low carbon structural steel or low carbon alloy steel. The hook material affects the safety of use. The inspection of the hook is very important, and the inspection load is determined according to national standards. After the hook is removed from the inspection load, the increase in opening should not exceed 0.25% of the original opening in the absence of any obvious defects or changes. The hook should be able to reliably support 2 times the test load without falling off.

In short, the quality of the container door machine hook will affect the safety of use. The performance of the hook must be ensured to meet the needs of production. If cracks or defects appear during operation, they need to be replaced in time to avoid damage.