How to slow down the wear and tear on the hook set?
When using large lifting equipment, an essential part that needs to be used is the hook set. It provides great convenience for the continuous operation of the equipment and is very durable. However, sometimes it may malfunction due to some reasons, affecting its normal use. Let’s take a look at what to do when it becomes worn.
1. When dealing with this situation, first remove the nut of the hook, and then clean the dirt on it. In addition, check it carefully. When the worn part accounts for one-third of the entire hook group, check to see if there are any cracks. If there are any, they should be dealt with in time.
2. The places where wear often occurs are at the hook mouth and the pulley rim, so these two places should be checked in time during use.
3. Use the auxiliary hoist correctly. If used improperly, it will wear out very quickly. Therefore, multiple wire ropes should be used when lifting objects. This can reduce the damage to the hook mouth to a large extent and extend its service life.
The above is a method to extend the use time of the hook set. You can refer to it when using it.
When using large lifting equipment, an essential part that needs to be used is the hook set. It provides great convenience for the continuous operation of the equipment and is very durable. However, sometimes it may malfunction due to some reasons, affecting its normal use. Let’s take a look at what to do when it becomes worn.
1. When dealing with this situation, first remove the nut of the hook, and then clean the dirt on it. In addition, check it carefully. When the worn part accounts for one-third of the entire hook group, check to see if there are any cracks. If there are any, they should be dealt with in time.
2. The places where wear often occurs are at the hook mouth and the pulley rim, so these two places should be checked in time during use.
3. Use the auxiliary hoist correctly. If used improperly, it will wear out very quickly. Therefore, multiple wire ropes should be used when lifting objects. This can reduce the damage to the hook mouth to a large extent and extend its service life.
The above is a method to extend the use time of the hook set. You can refer to it when using it.
When using large lifting equipment, an essential part that needs to be used is the hook set. It provides great convenience for the continuous operation of the equipment and is very durable. However, sometimes it may malfunction due to some reasons, affecting its normal use. Let’s take a look at what to do when it becomes worn.
1. When dealing with this situation, first remove the nut of the hook, and then clean the dirt on it. In addition, check it carefully. When the worn part accounts for one-third of the entire hook group, check to see if there are any cracks. If there are any, they should be dealt with in time.
2. The places where wear often occurs are at the hook mouth and the pulley rim, so these two places should be checked in time during use.
3. Use the auxiliary hoist correctly. If used improperly, it will wear out very quickly. Therefore, multiple wire ropes should be used when lifting objects. This can reduce the damage to the hook mouth to a large extent and extend its service life.
The above is a method to extend the use time of the hook set. You can refer to it when using it.
Inquiry
Please leave us your requirements, we will contact you soon.