Maintenance inspection and assembly process of hook group
The hook set is an indispensable accessory for many lifting equipment. Its performance and stability have a great relationship with the overall safety of the lifting equipment. Regular inspection and maintenance of the hook set is a critical matter.
Maintenance and maintenance process of hook group:
1. Clean the hook assembly with kerosene, and check it thoroughly with a magnifying glass after drying. If cracks are found, repair and welding are not allowed and they should be replaced immediately.
2. Check parts such as tie plates and beams. When the pull plate is severely worn, it can be rebored with high-quality welding rods after welding. If you are replacing new parts, you need to ensure that the mechanical properties of the material meet the requirements.
3. For a hook set that has been used for a period of time, the surface of the hook usually becomes hard due to the action of the wire rope. Therefore, the hook set needs to be annealed once a year.
4. The hook group should be carefully inspected at least once a year, and the hook body should be inspected individually every quarter.
The main components and assembly process of the hook group:
The hook set is a combination of the hook and the movable pulley of the pulley set. First assemble the hook in the reverse order of removing the hook, and then assemble the movable pulley in the reverse order of removing the movable pulley in the hook set. During the assembly process of the hook set, lubricate each lubricated part.
The hook set is an indispensable accessory for many lifting equipment. Its performance and stability have a great relationship with the overall safety of the lifting equipment. Regular inspection and maintenance of the hook set is a critical matter.
Maintenance and maintenance process of hook group:
1. Clean the hook assembly with kerosene, and check it thoroughly with a magnifying glass after drying. If cracks are found, repair and welding are not allowed and they should be replaced immediately.
2. Check parts such as tie plates and beams. When the pull plate is severely worn, it can be rebored with high-quality welding rods after welding. If you are replacing new parts, you need to ensure that the mechanical properties of the material meet the requirements.
3. For a hook set that has been used for a period of time, the surface of the hook usually becomes hard due to the action of the wire rope. Therefore, the hook set needs to be annealed once a year.
4. The hook group should be carefully inspected at least once a year, and the hook body should be inspected individually every quarter.
The main components and assembly process of the hook group:
The hook set is a combination of the hook and the movable pulley of the pulley set. First assemble the hook in the reverse order of removing the hook, and then assemble the movable pulley in the reverse order of removing the movable pulley in the hook set. During the assembly process of the hook set, lubricate each lubricated part.
The hook set is an indispensable accessory for many lifting equipment. Its performance and stability have a great relationship with the overall safety of the lifting equipment. Regular inspection and maintenance of the hook set is a critical matter.
Maintenance and maintenance process of hook group:
1. Clean the hook assembly with kerosene, and check it thoroughly with a magnifying glass after drying. If cracks are found, repair and welding are not allowed and they should be replaced immediately.
2. Check parts such as tie plates and beams. When the pull plate is severely worn, it can be rebored with high-quality welding rods after welding. If you are replacing new parts, you need to ensure that the mechanical properties of the material meet the requirements.
3. For a hook set that has been used for a period of time, the surface of the hook usually becomes hard due to the action of the wire rope. Therefore, the hook set needs to be annealed once a year.
4. The hook group should be carefully inspected at least once a year, and the hook body should be inspected individually every quarter.
The main components and assembly process of the hook group:
The hook set is a combination of the hook and the movable pulley of the pulley set. First assemble the hook in the reverse order of removing the hook, and then assemble the movable pulley in the reverse order of removing the movable pulley in the hook set. During the assembly process of the hook set, lubricate each lubricated part.
Inquiry
Please leave us your requirements, we will contact you soon.