News

　　In order to ensure the smooth lifting of personnel and goods during use, a series of inspections are required before use. Let us understand the corresponding inspection details below.

　　1. For newly purchased fully enclosed hook group, the manufacturer's technical proof documents must be checked before use and the opening degree of the new hook group must be measured. The new hook group also needs to undergo load tests.

　　2. Before use, check the rated lifting weight marked on the hook group, and it must not be less than the actual lifting weight. This should also be strictly paid attention to during the official lifting period in the future, and the hook set should not be used if it exceeds the rated load capacity.

　　3. Use tin oil to clean the three dangerous sections of the train hook group and use a magnifying glass to check for cracks.

　　4. The surface of the fully enclosed hook group should be smooth and free of defects such as peeling, markings, joints and cracks.

　　5. Check the connection part of the equipment frequently to confirm whether the connection is reliable and whether the lubrication is good.

　　6. During use of the hook set, it should be checked regularly for any abnormalities such as deformation, cracks, wear, etc.

　　The above six points are very important for the lifting process, and inspections are required before formally using the fully enclosed hook group.

　　In order to ensure the smooth lifting of personnel and goods during use, a series of inspections are required before use. Let us understand the corresponding inspection details below.

　　1. For newly purchased fully enclosed hook group, the manufacturer's technical proof documents must be checked before use and the opening degree of the new hook group must be measured. The new hook group also needs to undergo load tests.

　　2. Before use, check the rated lifting weight marked on the hook group, and it must not be less than the actual lifting weight. This should also be strictly paid attention to during the official lifting period in the future, and the hook set should not be used if it exceeds the rated load capacity.

　　3. Use tin oil to clean the three dangerous sections of the train hook group and use a magnifying glass to check for cracks.

　　4. The surface of the fully enclosed hook group should be smooth and free of defects such as peeling, markings, joints and cracks.

　　5. Check the connection part of the equipment frequently to confirm whether the connection is reliable and whether the lubrication is good.

　　6. During use of the hook set, it should be checked regularly for any abnormalities such as deformation, cracks, wear, etc.

　　The above six points are very important for the lifting process, and inspections are required before formally using the fully enclosed hook group.