What issues should be considered when using metallurgical lifting tools?
1. During use, if the rotation lock is inflexible or inadequate, the adjustment nut should be checked.
2. During use, the paint on the spreader sign should be prevented from falling off. Once discovered, the original logo paint should be supplemented in time.
3. For the wire rope on the lifting spreader, the wire rope should be cleaned and applied with lubricant or grease in time, especially the curved wire rope.
4. For the main stress-bearing components, suspended rings, rotary locks, ear plates and rigging, under normal use and cleaning conditions, check at least once every 3 months, and no cracks or severe deformation shall be performed.
5. All oil cups, including the oil cup of the ratchet mechanism, the oil cup of the slidable bearing seat, and the oil cup of the rotating bearing seat, should be filled with lubricating oil at the main movable joints in the rotating box in a timely manner.
6. Check frequently whether the rope clamp is loose and whether the cushioning spring is overstretched, and deal with problems in time if they are found.
7. The lifting spreader cannot exceed its rated lifting weight, and the cushioning spring cannot be overstretched.
The above is an introduction to some issues that need to be paid attention to during use of metallurgical spreader. You can find out if you have any questions and needs. You can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
1. During use, if the rotation lock is inflexible or inadequate, the adjustment nut should be checked.
2. During use, the paint on the spreader sign should be prevented from falling off. Once discovered, the original logo paint should be supplemented in time.
3. For the wire rope on the lifting spreader, the wire rope should be cleaned and applied with lubricant or grease in time, especially the curved wire rope.
4. For the main stress-bearing components, suspended rings, rotary locks, ear plates and rigging, under normal use and cleaning conditions, check at least once every 3 months, and no cracks or severe deformation shall be performed.
5. All oil cups, including the oil cup of the ratchet mechanism, the oil cup of the slidable bearing seat, and the oil cup of the rotating bearing seat, should be filled with lubricating oil at the main movable joints in the rotating box in a timely manner.
6. Check frequently whether the rope clamp is loose and whether the cushioning spring is overstretched, and deal with problems in time if they are found.
7. The lifting spreader cannot exceed its rated lifting weight, and the cushioning spring cannot be overstretched.
The above is an introduction to some issues that need to be paid attention to during use of metallurgical spreader. You can find out if you have any questions and needs. You can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
1. During use, if the rotation lock is inflexible or inadequate, the adjustment nut should be checked.
2. During use, the paint on the spreader sign should be prevented from falling off. Once discovered, the original logo paint should be supplemented in time.
3. For the wire rope on the lifting spreader, the wire rope should be cleaned and applied with lubricant or grease in time, especially the curved wire rope.
4. For the main stress-bearing components, suspended rings, rotary locks, ear plates and rigging, under normal use and cleaning conditions, check at least once every 3 months, and no cracks or severe deformation shall be performed.
5. All oil cups, including the oil cup of the ratchet mechanism, the oil cup of the slidable bearing seat, and the oil cup of the rotating bearing seat, should be filled with lubricating oil at the main movable joints in the rotating box in a timely manner.
6. Check frequently whether the rope clamp is loose and whether the cushioning spring is overstretched, and deal with problems in time if they are found.
7. The lifting spreader cannot exceed its rated lifting weight, and the cushioning spring cannot be overstretched.
The above is an introduction to some issues that need to be paid attention to during use of metallurgical spreader. You can find out if you have any questions and needs. You can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Inquiry
Please leave us your requirements, we will contact you soon.