News

　　1. The purchased sling must be produced and inspected in accordance with relevant national regulations, and has a certificate of conformity and maintenance instructions.

　　2. When choosing the specifications of the sling, external factors such as the weight, appearance, working force requirements and working environment of the sling must be taken into account.

　　3. After the purchased spreaders are entered into the factory, the competent department shall organize the quality inspection department and the user unit to jointly accept them, and establish a two-level ledger for the competent department and the user unit.

　　4. Overloading is strictly prohibited.

　　5. Unmarked slings shall not be used without confirmation.

　　6. A hammer cannot be used to correct deformed spreaders.

　　7. Dragging from under the heavy object or allowing the heavy object to roll on the sling.

　　8. Check the spreader and rigging before construction. After confirming that the spreader is intact and can only be put into use after working properly.

　　9. Before hanging the bolt, you should determine whether the bolt connection point set on the hanging object is reliable.

　　10. The load capacity of the sling shall not exceed the rated lifting capacity, and the load capacity of the sling shall not exceed the safety work load.

　　11. During operation, the lifting parts, spreaders and rigging shall not be damaged. When lifting heavy objects with edges and corners, protective pads shall be installed at their contact with the suspension.

　　12. The lifting point of the crane hook should be kept on the same plumb line as the center of gravity of the lifting object, and can only be lifted when the lifting object is in equilibrium.

　　The above is some introduction to the specific content of the use and management of lifting and spreading equipment. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time! Remember to leave your contact information so we can contact you!

　　1. The purchased sling must be produced and inspected in accordance with relevant national regulations, and has a certificate of conformity and maintenance instructions.

　　2. When choosing the specifications of the sling, external factors such as the weight, appearance, working force requirements and working environment of the sling must be taken into account.

　　3. After the purchased spreaders are entered into the factory, the competent department shall organize the quality inspection department and the user unit to jointly accept them, and establish a two-level ledger for the competent department and the user unit.

　　4. Overloading is strictly prohibited.

　　5. Unmarked slings shall not be used without confirmation.

　　6. A hammer cannot be used to correct deformed spreaders.

　　7. Dragging from under the heavy object or allowing the heavy object to roll on the sling.

　　8. Check the spreader and rigging before construction. After confirming that the spreader is intact and can only be put into use after working properly.

　　9. Before hanging the bolt, you should determine whether the bolt connection point set on the hanging object is reliable.

　　10. The load capacity of the sling shall not exceed the rated lifting capacity, and the load capacity of the sling shall not exceed the safety work load.

　　11. During operation, the lifting parts, spreaders and rigging shall not be damaged. When lifting heavy objects with edges and corners, protective pads shall be installed at their contact with the suspension.

　　12. The lifting point of the crane hook should be kept on the same plumb line as the center of gravity of the lifting object, and can only be lifted when the lifting object is in equilibrium.

　　The above is some introduction to the specific content of the use and management of lifting and spreading equipment. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time! Remember to leave your contact information so we can contact you!