At what point are crane hooks considered to be scrapped?
There are standards for scrapping when used. So to what extent is the use of lift hook considered to be scrapped?
Guidelines for the abandonment of lifting hooks:
If one of the following situations occurs, the hook should be scrapped.
1. Crack;
2. The wear of the dangerous section reaches 10% of the original size;
3. The opening increases by 15% compared to the original size;
4. The twisting deformation of the hook body is greater than 10°;
5. The dangerous cross-section of the hook or the hook neck undergoes plastic deformation;
6. The hook wire corrosion;
7. When the wear of the hook bushing reaches 50% of the original size, the bushing needs to be replaced;
8. When the wear of the hook type mandrel reaches 5% of the original size, the mandrel needs to be replaced;
8. When the wear of the hook type mandrel reaches 5%, the mandrel should be replaced.
The above is some introduction to the scrapping standards of lifting hooks. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!
There are standards for scrapping when used. So to what extent is the use of lift hook considered to be scrapped?
Guidelines for the abandonment of lifting hooks:
If one of the following situations occurs, the hook should be scrapped.
1. Crack;
2. The wear of the dangerous section reaches 10% of the original size;
3. The opening increases by 15% compared to the original size;
4. The twisting deformation of the hook body is greater than 10°;
5. The dangerous cross-section of the hook or the hook neck undergoes plastic deformation;
6. The hook wire corrosion;
7. When the wear of the hook bushing reaches 50% of the original size, the bushing needs to be replaced;
8. When the wear of the hook type mandrel reaches 5% of the original size, the mandrel needs to be replaced;
8. When the wear of the hook type mandrel reaches 5%, the mandrel should be replaced.
The above is some introduction to the scrapping standards of lifting hooks. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!
There are standards for scrapping when used. So to what extent is the use of lift hook considered to be scrapped?
Guidelines for the abandonment of lifting hooks:
If one of the following situations occurs, the hook should be scrapped.
1. Crack;
2. The wear of the dangerous section reaches 10% of the original size;
3. The opening increases by 15% compared to the original size;
4. The twisting deformation of the hook body is greater than 10°;
5. The dangerous cross-section of the hook or the hook neck undergoes plastic deformation;
6. The hook wire corrosion;
7. When the wear of the hook bushing reaches 50% of the original size, the bushing needs to be replaced;
8. When the wear of the hook type mandrel reaches 5% of the original size, the mandrel needs to be replaced;
8. When the wear of the hook type mandrel reaches 5%, the mandrel should be replaced.
The above is some introduction to the scrapping standards of lifting hooks. You can find out if you have any questions or needs. You can contact us directly, or leave your needs and contact information directly on the website, and we will contact you in time!
Inquiry
Please leave us your requirements, we will contact you soon.