News

　　Spreading tools, as a special spreader for lifting equipment, can complete the mobile lifting, dismantling and packaging of goods or heavy objects, and play a very important role in industrial processing such as container transportation, lifting and metallurgy. Therefore, related work needs to be done well to reduce the wear of the hinged points between the spreader and the beam, reduce the failure rate, extend the use cycle, save the cost of replacement of spare parts, and safe use is of great significance to the safe production operation of enterprises.

　　Next, let's take a look at the introduction to the safety precautions for using container spreaders:

　　1: The spreader contacts the welding wire.

　　2: Direct contact between the spreaders.

　　Three: The spreader often rubs against the sharp edges of the metal.

　　Four: The spreader passes through the damaged pulley.

　　Five: The lifting angle of the spreader exceeds 60 degrees.

　　VI: For spreaders used on high-temperature objects, thermal insulation measures must be taken to prevent the strength and lifespan of the spreader.

　　7: When the spreader is scrapped and cut, measures should be taken to prevent the rope strands from spreading.

　　The above are some issues that should be paid attention to during the use of the container spreader. I hope everyone can operate according to the above requirements to prevent accidents.

　　Spreading tools, as a special spreader for lifting equipment, can complete the mobile lifting, dismantling and packaging of goods or heavy objects, and play a very important role in industrial processing such as container transportation, lifting and metallurgy. Therefore, related work needs to be done well to reduce the wear of the hinged points between the spreader and the beam, reduce the failure rate, extend the use cycle, save the cost of replacement of spare parts, and safe use is of great significance to the safe production operation of enterprises.

　　Next, let's take a look at the introduction to the safety precautions for using container spreaders:

　　1: The spreader contacts the welding wire.

　　2: Direct contact between the spreaders.

　　Three: The spreader often rubs against the sharp edges of the metal.

　　Four: The spreader passes through the damaged pulley.

　　Five: The lifting angle of the spreader exceeds 60 degrees.

　　VI: For spreaders used on high-temperature objects, thermal insulation measures must be taken to prevent the strength and lifespan of the spreader.

　　7: When the spreader is scrapped and cut, measures should be taken to prevent the rope strands from spreading.

　　The above are some issues that should be paid attention to during the use of the container spreader. I hope everyone can operate according to the above requirements to prevent accidents.