News

　　The crane hook group consists of several parts, mainly including hooks and pulleys. It is an important part of lifting equipment when lifting goods and can slide and fix goods.

　　When choosing the size of the climb hook, the specifications, volume, appearance and suitable lifting methods of the lifting object must be considered. When choosing, it is necessary not only to have good performance, but also to meet the selection method and the appropriate hook length. If multiple hooks are used together, hooks of the same specification must be selected and the material of the flat hook will not be affected by the surrounding environment or load.

　　In use, the hook bears a lot of gravity and tension. If used without inspection for a long time, some faults may occur and cannot be detected in time, resulting in unstable or stuck in the lifting of the goods, cracked hooks, etc. Therefore, it is necessary to inspect the crane hook group.

　　If there are too many stains on the surface of the component during the inspection, you can clean it with kerosene and other non-corrosive liquids.

　　After completion, carefully observe whether there are cracks on the surface and inner surface. If cracks occur, they should be replaced in time and cannot be used after repair.

　　As long-term contact with the wire rope, some hardening may occur on the surface of the hook group, so the annealing should be carried out every year.Do it once.

　　The crane hook group consists of several parts, mainly including hooks and pulleys. It is an important part of lifting equipment when lifting goods and can slide and fix goods.

　　When choosing the size of the climb hook, the specifications, volume, appearance and suitable lifting methods of the lifting object must be considered. When choosing, it is necessary not only to have good performance, but also to meet the selection method and the appropriate hook length. If multiple hooks are used together, hooks of the same specification must be selected and the material of the flat hook will not be affected by the surrounding environment or load.

　　In use, the hook bears a lot of gravity and tension. If used without inspection for a long time, some faults may occur and cannot be detected in time, resulting in unstable or stuck in the lifting of the goods, cracked hooks, etc. Therefore, it is necessary to inspect the crane hook group.

　　If there are too many stains on the surface of the component during the inspection, you can clean it with kerosene and other non-corrosive liquids.

　　After completion, carefully observe whether there are cracks on the surface and inner surface. If cracks occur, they should be replaced in time and cannot be used after repair.

　　As long-term contact with the wire rope, some hardening may occur on the surface of the hook group, so the annealing should be carried out every year.Do it once.