What should you pay attention to when selecting and using crane hooks?
The crane hook group consists of several parts, mainly including hooks and pulleys. It is an important part of lifting equipment when lifting goods, and can play the role of sliding and fixing goods.
When selecting the size of the crane hook, the specifications, volume, appearance and suitable lifting method of the lifted object must be considered. When choosing, not only must have good performance, but also meet the selection method and suitable hook length. If multiple hooks are used together, hooks of the same specification must be selected, and the material of the flat hook will not be affected by the surrounding environment or load.
During use, the hook bears a lot of gravity and tension. If it is used without inspection for a long time, some faults may occur that cannot be discovered in time, resulting in instability or jamming when lifting goods, cracking of the hook, etc. Therefore, it is necessary to inspect the crane hook group.
If there are too many stains on the surface of the parts during the inspection, they can be cleaned with kerosene and other non-corrosive liquids.
After completion, carefully observe whether there are any cracks on the surface and inner surface. If cracks occur, they should be replaced in time and cannot be used again after repair.
Due to long-term contact with the wire rope, some hardening may occur on the surface of the hook set, so annealing should be performed once a year.
The crane hook group consists of several parts, mainly including hooks and pulleys. It is an important part of lifting equipment when lifting goods, and can play the role of sliding and fixing goods.
When selecting the size of the crane hook, the specifications, volume, appearance and suitable lifting method of the lifted object must be considered. When choosing, not only must have good performance, but also meet the selection method and suitable hook length. If multiple hooks are used together, hooks of the same specification must be selected, and the material of the flat hook will not be affected by the surrounding environment or load.
During use, the hook bears a lot of gravity and tension. If it is used without inspection for a long time, some faults may occur that cannot be discovered in time, resulting in instability or jamming when lifting goods, cracking of the hook, etc. Therefore, it is necessary to inspect the crane hook group.
If there are too many stains on the surface of the parts during the inspection, they can be cleaned with kerosene and other non-corrosive liquids.
After completion, carefully observe whether there are any cracks on the surface and inner surface. If cracks occur, they should be replaced in time and cannot be used again after repair.
Due to long-term contact with the wire rope, some hardening may occur on the surface of the hook set, so annealing should be performed once a year.
The crane hook group consists of several parts, mainly including hooks and pulleys. It is an important part of lifting equipment when lifting goods, and can play the role of sliding and fixing goods.
When selecting the size of the crane hook, the specifications, volume, appearance and suitable lifting method of the lifted object must be considered. When choosing, not only must have good performance, but also meet the selection method and suitable hook length. If multiple hooks are used together, hooks of the same specification must be selected, and the material of the flat hook will not be affected by the surrounding environment or load.
During use, the hook bears a lot of gravity and tension. If it is used without inspection for a long time, some faults may occur that cannot be discovered in time, resulting in instability or jamming when lifting goods, cracking of the hook, etc. Therefore, it is necessary to inspect the crane hook group.
If there are too many stains on the surface of the parts during the inspection, they can be cleaned with kerosene and other non-corrosive liquids.
After completion, carefully observe whether there are any cracks on the surface and inner surface. If cracks occur, they should be replaced in time and cannot be used again after repair.
Due to long-term contact with the wire rope, some hardening may occur on the surface of the hook set, so annealing should be performed once a year.
Inquiry
Please leave us your requirements, we will contact you soon.