What are the daily inspection tasks of the hook group?
The hook group is one of the important accessories on the crane. Its use is related to whether the connection between the crane and the heavy objects is tight, and it also ensures the safe lifting of the heavy objects. In daily work, in order to ensure that the crane can work normally and safely, it is often necessary to inspect the hook group. So what are the daily inspections of the hook group? Let's have a brief understanding with Weihua Heavy Duty!
1. The new hook set used in hoisting should be inspected before use and should have technical certification documents from the manufacturer. Otherwise, it cannot be put into use blindly. The opening of the new hook set must be measured and it should comply with regulations.
2. The new hook set should undergo a load test.
3. Before using the hook group, you should check the rated lifting capacity marked on the hook group, which must not be less than the actual lifting capacity. If there is no mark or the lifting capacity mark is unclear, the rated lifting capacity should be determined again and through compliance testing.
4. Clean the three dangerous sections of the hook group with kerosene and use a magnifying glass to see if there are any cracks. Check the price difference of the plate hook set and the wear of the pins.
5. The surface of the hook set used in lifting operations must be smooth and free of defects such as peeling, scratches, sharp angles, seams, and cracks.
6. Check the connection part of the hook group frequently to confirm whether the connection is reliable and whether the lubrication is good.
7. During the use of the hook set, regular inspections should be carried out. The main contents include deformation, cracks, wear, corrosion, etc., and records should be kept.
8. When hanging the sling, hang the sling to the bottom of the hook group. Suzhou Hoisting Company During the operation, if the hook set needs to be directly hooked into the lifting ring of the component, it cannot be hard to avoid causing the hook body to be subject to lateral force and cause distortion and deformation.
9. The hook group is not allowed to perform overload operations.
10. Repair welding of the hook set is not allowed.
11. The hook group should be equipped with a safety device to prevent decoupling.
The hook group is one of the important accessories on the crane. Its use is related to whether the connection between the crane and the heavy objects is tight, and it also ensures the safe lifting of the heavy objects. In daily work, in order to ensure that the crane can work normally and safely, it is often necessary to inspect the hook group. So what are the daily inspections of the hook group? Let's have a brief understanding with Weihua Heavy Duty!
1. The new hook set used in hoisting should be inspected before use and should have technical certification documents from the manufacturer. Otherwise, it cannot be put into use blindly. The opening of the new hook set must be measured and it should comply with regulations.
2. The new hook set should undergo a load test.
3. Before using the hook group, you should check the rated lifting capacity marked on the hook group, which must not be less than the actual lifting capacity. If there is no mark or the lifting capacity mark is unclear, the rated lifting capacity should be determined again and through compliance testing.
4. Clean the three dangerous sections of the hook group with kerosene and use a magnifying glass to see if there are any cracks. Check the price difference of the plate hook set and the wear of the pins.
5. The surface of the hook set used in lifting operations must be smooth and free of defects such as peeling, scratches, sharp angles, seams, and cracks.
6. Check the connection part of the hook group frequently to confirm whether the connection is reliable and whether the lubrication is good.
7. During the use of the hook set, regular inspections should be carried out. The main contents include deformation, cracks, wear, corrosion, etc., and records should be kept.
8. When hanging the sling, hang the sling to the bottom of the hook group. Suzhou Hoisting Company During the operation, if the hook set needs to be directly hooked into the lifting ring of the component, it cannot be hard to avoid causing the hook body to be subject to lateral force and cause distortion and deformation.
9. The hook group is not allowed to perform overload operations.
10. Repair welding of the hook set is not allowed.
11. The hook group should be equipped with a safety device to prevent decoupling.
The hook group is one of the important accessories on the crane. Its use is related to whether the connection between the crane and the heavy objects is tight, and it also ensures the safe lifting of the heavy objects. In daily work, in order to ensure that the crane can work normally and safely, it is often necessary to inspect the hook group. So what are the daily inspections of the hook group? Let's have a brief understanding with Weihua Heavy Duty!
1. The new hook set used in hoisting should be inspected before use and should have technical certification documents from the manufacturer. Otherwise, it cannot be put into use blindly. The opening of the new hook set must be measured and it should comply with regulations.
2. The new hook set should undergo a load test.
3. Before using the hook group, you should check the rated lifting capacity marked on the hook group, which must not be less than the actual lifting capacity. If there is no mark or the lifting capacity mark is unclear, the rated lifting capacity should be determined again and through compliance testing.
4. Clean the three dangerous sections of the hook group with kerosene and use a magnifying glass to see if there are any cracks. Check the price difference of the plate hook set and the wear of the pins.
5. The surface of the hook set used in lifting operations must be smooth and free of defects such as peeling, scratches, sharp angles, seams, and cracks.
6. Check the connection part of the hook group frequently to confirm whether the connection is reliable and whether the lubrication is good.
7. During the use of the hook set, regular inspections should be carried out. The main contents include deformation, cracks, wear, corrosion, etc., and records should be kept.
8. When hanging the sling, hang the sling to the bottom of the hook group. Suzhou Hoisting Company During the operation, if the hook set needs to be directly hooked into the lifting ring of the component, it cannot be hard to avoid causing the hook body to be subject to lateral force and cause distortion and deformation.
9. The hook group is not allowed to perform overload operations.
10. Repair welding of the hook set is not allowed.
11. The hook group should be equipped with a safety device to prevent decoupling.
Inquiry
Please leave us your requirements, we will contact you soon.