The hook group is easily overlooked during the maintenance of lifting equipment
The hook group is composed of multiple components, mainly: hooks and pulleys. It is an important component of lifting equipment when lifting goods, and can slide and fix goods. It has suffered a lot of gravity and tension during use. If you do not check it for a long time, some faults may occur and cannot be discovered in time, resulting in poor rise or lag during lifting the goods, cracked hooks, etc. These situations seriously threaten equipment, goods and employees.
Inspecting the hook group is necessary, but it is easy for users to ignore it. If there are too many stains to cover the surface of the component during inspection, you can clean them with kerosene and other non-corrosive liquids. After completion, carefully observe whether there are cracks on the surface and the inner surface. If cracks appear, replace them in time and cannot be used continuously through repairs, because the repair lacks integration and their use is relatively strong, and they cannot achieve complete results after repair. Because of the long-term contact with the wire rope, some hardening may occur on the surface of the hook group, and annealing should be carried out once a year.
The hook group is composed of multiple components, mainly: hooks and pulleys. It is an important component of lifting equipment when lifting goods, and can slide and fix goods. It has suffered a lot of gravity and tension during use. If you do not check it for a long time, some faults may occur and cannot be discovered in time, resulting in poor rise or lag during lifting the goods, cracked hooks, etc. These situations seriously threaten equipment, goods and employees.
Inspecting the hook group is necessary, but it is easy for users to ignore it. If there are too many stains to cover the surface of the component during inspection, you can clean them with kerosene and other non-corrosive liquids. After completion, carefully observe whether there are cracks on the surface and the inner surface. If cracks appear, replace them in time and cannot be used continuously through repairs, because the repair lacks integration and their use is relatively strong, and they cannot achieve complete results after repair. Because of the long-term contact with the wire rope, some hardening may occur on the surface of the hook group, and annealing should be carried out once a year.
The hook group is composed of multiple components, mainly: hooks and pulleys. It is an important component of lifting equipment when lifting goods, and can slide and fix goods. It has suffered a lot of gravity and tension during use. If you do not check it for a long time, some faults may occur and cannot be discovered in time, resulting in poor rise or lag during lifting the goods, cracked hooks, etc. These situations seriously threaten equipment, goods and employees.
Inspecting the hook group is necessary, but it is easy for users to ignore it. If there are too many stains to cover the surface of the component during inspection, you can clean them with kerosene and other non-corrosive liquids. After completion, carefully observe whether there are cracks on the surface and the inner surface. If cracks appear, replace them in time and cannot be used continuously through repairs, because the repair lacks integration and their use is relatively strong, and they cannot achieve complete results after repair. Because of the long-term contact with the wire rope, some hardening may occur on the surface of the hook group, and annealing should be carried out once a year.
Inquiry
Please leave us your requirements, we will contact you soon.