The hook group is very important as a lifting tool
Spreading tools are often used when people carry out lifting operations. They have a great effect. If there is no spreading tools, the lifting process may be difficult to achieve. Therefore, the choice of spreaders is very important, and the hook set is particularly important.
In the lifting process, the hook set usually uses components such as pulley sets. It is installed on the wire rope of the lifting mechanism and hangs the object on the hook group, and the overall lifting and lifting can be achieved.
Under what circumstances can it be determined that a hook group cannot be used? The manufacturer will explain it to you.
When cracks appear in the hook group, the equipment must be replaced in time. When it is corroded, or the cross-section occurs, or the neck of the hook group undergoes plastic deformation, etc., the equipment cannot be continued, and a new hook group should be replaced in time.
In addition, when the wear rate of the plate hook mandrel reaches 50%, the mandrel should be replaced in time. Correspondingly, when the wear rate of the plate hook bushing reaches 50%, the bushing should be replaced in time. This way the device will last longer.
The above are some precautions for using the hook group. I hope it will be helpful to you.
Spreading tools are often used when people carry out lifting operations. They have a great effect. If there is no spreading tools, the lifting process may be difficult to achieve. Therefore, the choice of spreaders is very important, and the hook set is particularly important.
In the lifting process, the hook set usually uses components such as pulley sets. It is installed on the wire rope of the lifting mechanism and hangs the object on the hook group, and the overall lifting and lifting can be achieved.
Under what circumstances can it be determined that a hook group cannot be used? The manufacturer will explain it to you.
When cracks appear in the hook group, the equipment must be replaced in time. When it is corroded, or the cross-section occurs, or the neck of the hook group undergoes plastic deformation, etc., the equipment cannot be continued, and a new hook group should be replaced in time.
In addition, when the wear rate of the plate hook mandrel reaches 50%, the mandrel should be replaced in time. Correspondingly, when the wear rate of the plate hook bushing reaches 50%, the bushing should be replaced in time. This way the device will last longer.
The above are some precautions for using the hook group. I hope it will be helpful to you.
Spreading tools are often used when people carry out lifting operations. They have a great effect. If there is no spreading tools, the lifting process may be difficult to achieve. Therefore, the choice of spreaders is very important, and the hook set is particularly important.
In the lifting process, the hook set usually uses components such as pulley sets. It is installed on the wire rope of the lifting mechanism and hangs the object on the hook group, and the overall lifting and lifting can be achieved.
Under what circumstances can it be determined that a hook group cannot be used? The manufacturer will explain it to you.
When cracks appear in the hook group, the equipment must be replaced in time. When it is corroded, or the cross-section occurs, or the neck of the hook group undergoes plastic deformation, etc., the equipment cannot be continued, and a new hook group should be replaced in time.
In addition, when the wear rate of the plate hook mandrel reaches 50%, the mandrel should be replaced in time. Correspondingly, when the wear rate of the plate hook bushing reaches 50%, the bushing should be replaced in time. This way the device will last longer.
The above are some precautions for using the hook group. I hope it will be helpful to you.
Inquiry
Please leave us your requirements, we will contact you soon.