Hook type and material
The commonly used hooks in the sky car can be divided into forged hooks and plate hooks. Forged hooks are divided into single hooks and double hooks; single hooks are used for sky carriages below 80T; double hooks are used for sky carriages above 80T. The board hooks are made of multiple steel plates cut into hook-shaped and are equipped with pads at the hook mouth, which can not only reduce wear on the hook body, but also allow the load to be distributed on each hook piece. It is mainly used on large lifting vans and metallurgical vans.
The hook is one of the important stress-bearing components of the van. It not only bears the weight of the hanging object, but also bears the impact load caused by the hanging object when the mechanism is started and braked. Therefore, the material of the hook is required to have high mechanical strength, but also has good toughness. The materials for forged hooks are often made of 20 and 20 SiMn steel, while plate hooks are often made of Q235 and 16Mn steel. Therefore, we need to choose different hooks according to the type of hook. Only by choosing products according to needs can we ensure the operation safety of large cranes.
The commonly used hooks in the sky car can be divided into forged hooks and plate hooks. Forged hooks are divided into single hooks and double hooks; single hooks are used for sky carriages below 80T; double hooks are used for sky carriages above 80T. The board hooks are made of multiple steel plates cut into hook-shaped and are equipped with pads at the hook mouth, which can not only reduce wear on the hook body, but also allow the load to be distributed on each hook piece. It is mainly used on large lifting vans and metallurgical vans.
The hook is one of the important stress-bearing components of the van. It not only bears the weight of the hanging object, but also bears the impact load caused by the hanging object when the mechanism is started and braked. Therefore, the material of the hook is required to have high mechanical strength, but also has good toughness. The materials for forged hooks are often made of 20 and 20 SiMn steel, while plate hooks are often made of Q235 and 16Mn steel. Therefore, we need to choose different hooks according to the type of hook. Only by choosing products according to needs can we ensure the operation safety of large cranes.
The commonly used hooks in the sky car can be divided into forged hooks and plate hooks. Forged hooks are divided into single hooks and double hooks; single hooks are used for sky carriages below 80T; double hooks are used for sky carriages above 80T. The board hooks are made of multiple steel plates cut into hook-shaped and are equipped with pads at the hook mouth, which can not only reduce wear on the hook body, but also allow the load to be distributed on each hook piece. It is mainly used on large lifting vans and metallurgical vans.
The hook is one of the important stress-bearing components of the van. It not only bears the weight of the hanging object, but also bears the impact load caused by the hanging object when the mechanism is started and braked. Therefore, the material of the hook is required to have high mechanical strength, but also has good toughness. The materials for forged hooks are often made of 20 and 20 SiMn steel, while plate hooks are often made of Q235 and 16Mn steel. Therefore, we need to choose different hooks according to the type of hook. Only by choosing products according to needs can we ensure the operation safety of large cranes.
Inquiry
Please leave us your requirements, we will contact you soon.