Types and uses of hooks
Hook has many types, and the shapes and types of different hook types are different, and the application fields will be slightly different. In order to let everyone know more about its purpose, the following will focus on the characteristics of the hook.
1. The hook group is a widely used picking device in lifting machinery.
2. At the same time, the hook group is also an important lifting component in lifting machinery.
3. The hook group uses a structure of 20 steel or 16Mn steel to make the hook have higher hardness and stiffness. In the hook group, the hook is the most important equipment in the hook group and plays an important role in the hook group.
4. Single hook is a commonly used hook. It is simple to construct and easy to use.
5. There are two forms of single hooks: a threaded straight handle single hook and a single hook with a ring, the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope.
6. The double hook is symmetrical under force, and the hook body material is fully utilized, but it is not as convenient as single hooks.
7. The structural dimensions of the hook have been standardized. In general, it can be directly selected according to the relevant standards based on the size of lifting weight and the type of work (manpower or maneuver).
8. Moreover, in the hook group, once the hook breaks during use, it is very easy to cause accidents.
9. Therefore, when using it, it must be used strictly in accordance with regulations and must not be used overloaded.
10. For hooks without load marks, they cannot be used casually.
Hook has many types, and the shapes and types of different hook types are different, and the application fields will be slightly different. In order to let everyone know more about its purpose, the following will focus on the characteristics of the hook.
1. The hook group is a widely used picking device in lifting machinery.
2. At the same time, the hook group is also an important lifting component in lifting machinery.
3. The hook group uses a structure of 20 steel or 16Mn steel to make the hook have higher hardness and stiffness. In the hook group, the hook is the most important equipment in the hook group and plays an important role in the hook group.
4. Single hook is a commonly used hook. It is simple to construct and easy to use.
5. There are two forms of single hooks: a threaded straight handle single hook and a single hook with a ring, the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope.
6. The double hook is symmetrical under force, and the hook body material is fully utilized, but it is not as convenient as single hooks.
7. The structural dimensions of the hook have been standardized. In general, it can be directly selected according to the relevant standards based on the size of lifting weight and the type of work (manpower or maneuver).
8. Moreover, in the hook group, once the hook breaks during use, it is very easy to cause accidents.
9. Therefore, when using it, it must be used strictly in accordance with regulations and must not be used overloaded.
10. For hooks without load marks, they cannot be used casually.
Hook has many types, and the shapes and types of different hook types are different, and the application fields will be slightly different. In order to let everyone know more about its purpose, the following will focus on the characteristics of the hook.
1. The hook group is a widely used picking device in lifting machinery.
2. At the same time, the hook group is also an important lifting component in lifting machinery.
3. The hook group uses a structure of 20 steel or 16Mn steel to make the hook have higher hardness and stiffness. In the hook group, the hook is the most important equipment in the hook group and plays an important role in the hook group.
4. Single hook is a commonly used hook. It is simple to construct and easy to use.
5. There are two forms of single hooks: a threaded straight handle single hook and a single hook with a ring, the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope.
6. The double hook is symmetrical under force, and the hook body material is fully utilized, but it is not as convenient as single hooks.
7. The structural dimensions of the hook have been standardized. In general, it can be directly selected according to the relevant standards based on the size of lifting weight and the type of work (manpower or maneuver).
8. Moreover, in the hook group, once the hook breaks during use, it is very easy to cause accidents.
9. Therefore, when using it, it must be used strictly in accordance with regulations and must not be used overloaded.
10. For hooks without load marks, they cannot be used casually.
Inquiry
Please leave us your requirements, we will contact you soon.