Explain how to reduce accidents caused by semi-enclosed hook groups
Semi-enclosed hook sets are usually run on crane racks, but if the workpiece weighs a large weight, sometimes large-sized hook set equipment is required. This part plays a role in grabbing and dropping in operational practice. Wire ropes can protect the workpiece from damage and improve work efficiency. In order to reduce the incidence of accidents, the following points need to be done when using this hook group.
1. Semi-enclosed hook groupWhen transporting goods, do not stand below. Operators should always pay attention to the operating environment and the surrounding staff.
2. Before the crane is running, check whether the brake can be used normally to avoid sudden failure during use and causing the cargo to fall off.
3. If it is necessary to replace it, you can use a forklift to transport the new semi-enclosed hook set to the replacement site, place it side by side with the old parts, and then fix it with inverted wooden pads.
4. During the replacement of old parts, they must pass through the pulley plates of the new hook set, and they must be operated by special staff during the welding process to avoid health accidents.
The above are the details of replacing the semi-closed hook group and reducing the chance of accidents. I hope it will be helpful to you.
Semi-enclosed hook sets are usually run on crane racks, but if the workpiece weighs a large weight, sometimes large-sized hook set equipment is required. This part plays a role in grabbing and dropping in operational practice. Wire ropes can protect the workpiece from damage and improve work efficiency. In order to reduce the incidence of accidents, the following points need to be done when using this hook group.
1. Semi-enclosed hook groupWhen transporting goods, do not stand below. Operators should always pay attention to the operating environment and the surrounding staff.
2. Before the crane is running, check whether the brake can be used normally to avoid sudden failure during use and causing the cargo to fall off.
3. If it is necessary to replace it, you can use a forklift to transport the new semi-enclosed hook set to the replacement site, place it side by side with the old parts, and then fix it with inverted wooden pads.
4. During the replacement of old parts, they must pass through the pulley plates of the new hook set, and they must be operated by special staff during the welding process to avoid health accidents.
The above are the details of replacing the semi-closed hook group and reducing the chance of accidents. I hope it will be helpful to you.
Semi-enclosed hook sets are usually run on crane racks, but if the workpiece weighs a large weight, sometimes large-sized hook set equipment is required. This part plays a role in grabbing and dropping in operational practice. Wire ropes can protect the workpiece from damage and improve work efficiency. In order to reduce the incidence of accidents, the following points need to be done when using this hook group.
1. Semi-enclosed hook groupWhen transporting goods, do not stand below. Operators should always pay attention to the operating environment and the surrounding staff.
2. Before the crane is running, check whether the brake can be used normally to avoid sudden failure during use and causing the cargo to fall off.
3. If it is necessary to replace it, you can use a forklift to transport the new semi-enclosed hook set to the replacement site, place it side by side with the old parts, and then fix it with inverted wooden pads.
4. During the replacement of old parts, they must pass through the pulley plates of the new hook set, and they must be operated by special staff during the welding process to avoid health accidents.
The above are the details of replacing the semi-closed hook group and reducing the chance of accidents. I hope it will be helpful to you.
Inquiry
Please leave us your requirements, we will contact you soon.