News

　　In our lives, more and more people use cranes to carry bulky cargo. The use of cranes has brought economic benefits to enterprises and helped workers reduce their physical output. Among them, we inevitably need to use semi-enclosed hook groups when using cranes.

　　We placed suspenders, slings and other spreaders on the hook set to help carry goods. However, in use, sometimes the goods fall due to improper operation. Once this happens, the goods will be slightly damaged and economic losses to the company. Seriously injure staff and cause more serious consequences.

　　So, when using the semi-closed hook group, the following points must be done to reduce the incidence rate.

　　1. When lifting goods in the hook group, do not stand below. Operators should always pay attention to the operating environment and the surrounding staff.

　　2. Keep driving at a constant speed when picking up the goods, do not start and stop quickly, causing the goods to sway and shake, and in severe cases, the goods will fall.

　　3. Sometimes the goods will fall off due to improper binding method. Therefore, according to the weight and status of the goods, select appropriate ropes for binding, and add protective plates to the goods if necessary.

　　4. Before the crane is running, check whether the brake can be used normally to avoid sudden failure during use and causing the cargo to fall off.

　　To sum up, the knowledge shared by the semi-enclosed hook set manufacturer and everyone, I hope it can help you.

　　In our lives, more and more people use cranes to carry bulky cargo. The use of cranes has brought economic benefits to enterprises and helped workers reduce their physical output. Among them, we inevitably need to use semi-enclosed hook groups when using cranes.

　　We placed suspenders, slings and other spreaders on the hook set to help carry goods. However, in use, sometimes the goods fall due to improper operation. Once this happens, the goods will be slightly damaged and economic losses to the company. Seriously injure staff and cause more serious consequences.

　　So, when using the semi-closed hook group, the following points must be done to reduce the incidence rate.

　　1. When lifting goods in the hook group, do not stand below. Operators should always pay attention to the operating environment and the surrounding staff.

　　2. Keep driving at a constant speed when picking up the goods, do not start and stop quickly, causing the goods to sway and shake, and in severe cases, the goods will fall.

　　3. Sometimes the goods will fall off due to improper binding method. Therefore, according to the weight and status of the goods, select appropriate ropes for binding, and add protective plates to the goods if necessary.

　　4. Before the crane is running, check whether the brake can be used normally to avoid sudden failure during use and causing the cargo to fall off.

　　To sum up, the knowledge shared by the semi-enclosed hook set manufacturer and everyone, I hope it can help you.