News

　　The hook group is an indispensable accessory on many lifting equipment. Its performance and stability have a great relationship with the overall safety of the lifting equipment. Regular inspection and maintenance of hook sets is a relatively critical task.

　　Maintenance and maintenance procedures of hook sets:

　　1. Use kerosene to clean the hook set, and thoroughly check with a magnifying glass after drying. If cracks are found, repair and welding are not allowed, and should be replaced immediately.

　　2. Check parts such as pull plates and beams. When the pull plate is severely worn, you can reboot with high-quality electrodes after welding. If you want to replace new parts, you need to ensure that the mechanical properties of the materials meet the requirements.

　　3. For hook groups that have been used for a period of time, the surface of the hook usually becomes hard due to the action of the wire rope, so the hook group must be annealed once a year.

　　4. The hook group should be carefully inspected at least once a year, and the hook body should be inspected separately once a quarter.

　　The main composition and assembly process of the hook group:

　　The hook group is a combination of movable pulleys of the hook and pulley group. The hook is first assembled in the reverse order of disassembly of the hook, and then assembled in the reverse order of removing the movable pulleys in the hook group. During the assembly of the hook set, each lubrication site is lubricated.

　The above is a related introduction to the maintenance and assembly process of hook sets, and I hope it can help you.

　　The hook group is an indispensable accessory on many lifting equipment. Its performance and stability have a great relationship with the overall safety of the lifting equipment. Regular inspection and maintenance of hook sets is a relatively critical task.

　　Maintenance and maintenance procedures of hook sets:

　　1. Use kerosene to clean the hook set, and thoroughly check with a magnifying glass after drying. If cracks are found, repair and welding are not allowed, and should be replaced immediately.

　　2. Check parts such as pull plates and beams. When the pull plate is severely worn, you can reboot with high-quality electrodes after welding. If you want to replace new parts, you need to ensure that the mechanical properties of the materials meet the requirements.

　　3. For hook groups that have been used for a period of time, the surface of the hook usually becomes hard due to the action of the wire rope, so the hook group must be annealed once a year.

　　4. The hook group should be carefully inspected at least once a year, and the hook body should be inspected separately once a quarter.

　　The main composition and assembly process of the hook group:

　　The hook group is a combination of movable pulleys of the hook and pulley group. The hook is first assembled in the reverse order of disassembly of the hook, and then assembled in the reverse order of removing the movable pulleys in the hook group. During the assembly of the hook set, each lubrication site is lubricated.

　The above is a related introduction to the maintenance and assembly process of hook sets, and I hope it can help you.