How should the hook group be used specifically?
As we all know, hook sets are a common spreader in lifting machinery. The hook is often suspended on the wire rope of the lifting mechanism by means of pulley sets and other components. There are two common types of hooks, single hook and double hook. Single hook is a commonly used hook, which is simple to construct and easy to use. Single hooks have a form: a threaded straight handle single hook is connected to a single hook with a ring, and the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope. The double hooks are symmetrical under force, and the hook body material is used, but it is not as convenient as single hooks. How to use the hook set?
The process of using the hook group requires an operator to operate, and it needs to be carried out according to the specifications from installation to use. Do you know how to use the fully enclosed hook group correctly? Let's give a detailed introduction below:
1. Before using the hook set, make sure it is produced by a regular manufacturer and has a certificate of qualification. It cannot be put into use blindly. Its opening degree, weighing weight and other indicators should be carefully and strictly inspected.
2. Check that the rated lifting weight marked on the hook shall not be less than the actual lifting weight. If there is no marking or the lifting weight marking is unclear, the rated lifting weight should be recalculated and determined through the compliance test.
3. The hooks specially used for lifting machinery have high requirements for them. They must ensure that their surface must be smooth and must not have defects such as peeling, markings, acute angles, seams and cracks.
4. Use tin oil to clean the three dangerous sections of the hook, and use a magnifying glass to see if there are cracks. The price difference between the sleeves and pins should be worn.
5. Pay attention to observation and inspection when etching during the use of the hook group, check whether there are any hidden dangers such as deformation, cracks, and cross-sections. Do not overweight in appropriate ways to avoid shortening the service life of the fully enclosed hook group.
As we all know, hook sets are a common spreader in lifting machinery. The hook is often suspended on the wire rope of the lifting mechanism by means of pulley sets and other components. There are two common types of hooks, single hook and double hook. Single hook is a commonly used hook, which is simple to construct and easy to use. Single hooks have a form: a threaded straight handle single hook is connected to a single hook with a ring, and the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope. The double hooks are symmetrical under force, and the hook body material is used, but it is not as convenient as single hooks. How to use the hook set?
The process of using the hook group requires an operator to operate, and it needs to be carried out according to the specifications from installation to use. Do you know how to use the fully enclosed hook group correctly? Let's give a detailed introduction below:
1. Before using the hook set, make sure it is produced by a regular manufacturer and has a certificate of qualification. It cannot be put into use blindly. Its opening degree, weighing weight and other indicators should be carefully and strictly inspected.
2. Check that the rated lifting weight marked on the hook shall not be less than the actual lifting weight. If there is no marking or the lifting weight marking is unclear, the rated lifting weight should be recalculated and determined through the compliance test.
3. The hooks specially used for lifting machinery have high requirements for them. They must ensure that their surface must be smooth and must not have defects such as peeling, markings, acute angles, seams and cracks.
4. Use tin oil to clean the three dangerous sections of the hook, and use a magnifying glass to see if there are cracks. The price difference between the sleeves and pins should be worn.
5. Pay attention to observation and inspection when etching during the use of the hook group, check whether there are any hidden dangers such as deformation, cracks, and cross-sections. Do not overweight in appropriate ways to avoid shortening the service life of the fully enclosed hook group.
As we all know, hook sets are a common spreader in lifting machinery. The hook is often suspended on the wire rope of the lifting mechanism by means of pulley sets and other components. There are two common types of hooks, single hook and double hook. Single hook is a commonly used hook, which is simple to construct and easy to use. Single hooks have a form: a threaded straight handle single hook is connected to a single hook with a ring, and the threaded part is connected to the hanger, and the ring is used to directly connect to the wire rope. The double hooks are symmetrical under force, and the hook body material is used, but it is not as convenient as single hooks. How to use the hook set?
The process of using the hook group requires an operator to operate, and it needs to be carried out according to the specifications from installation to use. Do you know how to use the fully enclosed hook group correctly? Let's give a detailed introduction below:
1. Before using the hook set, make sure it is produced by a regular manufacturer and has a certificate of qualification. It cannot be put into use blindly. Its opening degree, weighing weight and other indicators should be carefully and strictly inspected.
2. Check that the rated lifting weight marked on the hook shall not be less than the actual lifting weight. If there is no marking or the lifting weight marking is unclear, the rated lifting weight should be recalculated and determined through the compliance test.
3. The hooks specially used for lifting machinery have high requirements for them. They must ensure that their surface must be smooth and must not have defects such as peeling, markings, acute angles, seams and cracks.
4. Use tin oil to clean the three dangerous sections of the hook, and use a magnifying glass to see if there are cracks. The price difference between the sleeves and pins should be worn.
5. Pay attention to observation and inspection when etching during the use of the hook group, check whether there are any hidden dangers such as deformation, cracks, and cross-sections. Do not overweight in appropriate ways to avoid shortening the service life of the fully enclosed hook group.
Inquiry
Please leave us your requirements, we will contact you soon.