How to conduct load test on semi-enclosed hook group?
For the lifting process, it is very important to use corresponding accessories to help. So do you know the role of the semi-enclosed hook set? It can lift very heavy objects! But before it can be officially used, we need to conduct a load test on it. Let the manufacturer take us to learn more about it.
1. Before conducting the test, the surface of the semi-closed hook group needs to be wiped clean to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting capacity of the hook group, hang an object with a lifting capacity of 1.5 times on the hook group, and keep it for about 10 minutes.
3. After the time is up, remove the object and check the cross section and threaded part of the semi-enclosed hook group. If there is obvious deformation in these parts, the weight of the test object must be reduced and the test must be repeated.
4. If the hook mouth of the hook group is greatly worn, multiple tests will be required before determining its rated lifting capacity.
5. If there is a lot of wear and serious deformation, then it will be necessary to replace the hook set with a new one.
The above is a brief introduction to the load test of the semi-enclosed hook group. I hope it will be helpful to you.
For the lifting process, it is very important to use corresponding accessories to help. So do you know the role of the semi-enclosed hook set? It can lift very heavy objects! But before it can be officially used, we need to conduct a load test on it. Let the manufacturer take us to learn more about it.
1. Before conducting the test, the surface of the semi-closed hook group needs to be wiped clean to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting capacity of the hook group, hang an object with a lifting capacity of 1.5 times on the hook group, and keep it for about 10 minutes.
3. After the time is up, remove the object and check the cross section and threaded part of the semi-enclosed hook group. If there is obvious deformation in these parts, the weight of the test object must be reduced and the test must be repeated.
4. If the hook mouth of the hook group is greatly worn, multiple tests will be required before determining its rated lifting capacity.
5. If there is a lot of wear and serious deformation, then it will be necessary to replace the hook set with a new one.
The above is a brief introduction to the load test of the semi-enclosed hook group. I hope it will be helpful to you.
For the lifting process, it is very important to use corresponding accessories to help. So do you know the role of the semi-enclosed hook set? It can lift very heavy objects! But before it can be officially used, we need to conduct a load test on it. Let the manufacturer take us to learn more about it.
1. Before conducting the test, the surface of the semi-closed hook group needs to be wiped clean to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting capacity of the hook group, hang an object with a lifting capacity of 1.5 times on the hook group, and keep it for about 10 minutes.
3. After the time is up, remove the object and check the cross section and threaded part of the semi-enclosed hook group. If there is obvious deformation in these parts, the weight of the test object must be reduced and the test must be repeated.
4. If the hook mouth of the hook group is greatly worn, multiple tests will be required before determining its rated lifting capacity.
5. If there is a lot of wear and serious deformation, then it will be necessary to replace the hook set with a new one.
The above is a brief introduction to the load test of the semi-enclosed hook group. I hope it will be helpful to you.
Inquiry
Please leave us your requirements, we will contact you soon.