News

　　When installing and erecting cranes, pay more attention to observation, monitoring, unified command, and reliable contact. The lifting equipment and lifting rigging must be strictly inspected before use. Comply with the use and installation requirements of the wire rope, and do not cause hard bending, cage distortion, loose strands, broken wire core, etc.

　　The difference between hook cranes and electric hoist cranes: The bridge crane is a suspension bridge in terms of its name. He runs on the track of the high-altitude crane beam on the two sides. If there is one beam on this bridge, it is called a single beam and two beams on it are double beams.

　　If a single beam is used, the mechanical part that walks along the beam and the mechanical part that lifts are often installed and hung under the beam, commonly known as an electric hoist. The control of the crane is generally on the ground, and the operator needs to walk along with the movement of the crane on the ground. The lifting capacity is not large, and the operation is easy to be intuitive. The double-beam crane has two beams, beams, and beams. The mechanical part that walks along the beam and the mechanical part of the lifting are installed on the cart together, and runs across the upper part of the beam and beam. The lifting capacity can be large and the control personnel can be controlled in the control room on the crane. Ground commanders and crane operators are required to cooperate in the work.

　　When installing and erecting cranes, pay more attention to observation, monitoring, unified command, and reliable contact. The lifting equipment and lifting rigging must be strictly inspected before use. Comply with the use and installation requirements of the wire rope, and do not cause hard bending, cage distortion, loose strands, broken wire core, etc.

　　The difference between hook cranes and electric hoist cranes: The bridge crane is a suspension bridge in terms of its name. He runs on the track of the high-altitude crane beam on the two sides. If there is one beam on this bridge, it is called a single beam and two beams on it are double beams.

　　If a single beam is used, the mechanical part that walks along the beam and the mechanical part that lifts are often installed and hung under the beam, commonly known as an electric hoist. The control of the crane is generally on the ground, and the operator needs to walk along with the movement of the crane on the ground. The lifting capacity is not large, and the operation is easy to be intuitive. The double-beam crane has two beams, beams, and beams. The mechanical part that walks along the beam and the mechanical part of the lifting are installed on the cart together, and runs across the upper part of the beam and beam. The lifting capacity can be large and the control personnel can be controlled in the control room on the crane. Ground commanders and crane operators are required to cooperate in the work.