How to conduct load test on semi-enclosed hook group?
For the lifting process, it is very important to use the corresponding accessories to help. So do you know the role of semi-closed hook group? It can hang heavy objects! However, before this is officially used, we need to conduct load tests on it first. Let the manufacturer take us to understand it in detail below.
1. Before conducting the test, you need to wipe the surface of the semi-enclosed hook group to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting weight of the hook group, and hang an object with a lifting weight of 1.5 times on the hook group for the time being maintained for about 10 minutes.
3. After the time is up, remove the object and view the cross-section and threaded parts of the semi-enclosed hook group. If these parts have obvious deformation, the weight of the test object should be reduced and the test should be carried out again.
4. If the hook mouth of the hook group is worn greatly, it is necessary to conduct multiple tests before determining its rated lifting weight.
5. If the wear is very large and severe deformation occurs, then a new hook set needs to be replaced.
The above is a brief introduction to the load test of the semi-closed hook group, I hope it will be helpful to you.
For the lifting process, it is very important to use the corresponding accessories to help. So do you know the role of semi-closed hook group? It can hang heavy objects! However, before this is officially used, we need to conduct load tests on it first. Let the manufacturer take us to understand it in detail below.
1. Before conducting the test, you need to wipe the surface of the semi-enclosed hook group to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting weight of the hook group, and hang an object with a lifting weight of 1.5 times on the hook group for the time being maintained for about 10 minutes.
3. After the time is up, remove the object and view the cross-section and threaded parts of the semi-enclosed hook group. If these parts have obvious deformation, the weight of the test object should be reduced and the test should be carried out again.
4. If the hook mouth of the hook group is worn greatly, it is necessary to conduct multiple tests before determining its rated lifting weight.
5. If the wear is very large and severe deformation occurs, then a new hook set needs to be replaced.
The above is a brief introduction to the load test of the semi-closed hook group, I hope it will be helpful to you.
For the lifting process, it is very important to use the corresponding accessories to help. So do you know the role of semi-closed hook group? It can hang heavy objects! However, before this is officially used, we need to conduct load tests on it first. Let the manufacturer take us to understand it in detail below.
1. Before conducting the test, you need to wipe the surface of the semi-enclosed hook group to ensure that the surface is clean and tidy, so that the effect will be better.
2. Understand the limited lifting weight of the hook group, and hang an object with a lifting weight of 1.5 times on the hook group for the time being maintained for about 10 minutes.
3. After the time is up, remove the object and view the cross-section and threaded parts of the semi-enclosed hook group. If these parts have obvious deformation, the weight of the test object should be reduced and the test should be carried out again.
4. If the hook mouth of the hook group is worn greatly, it is necessary to conduct multiple tests before determining its rated lifting weight.
5. If the wear is very large and severe deformation occurs, then a new hook set needs to be replaced.
The above is a brief introduction to the load test of the semi-closed hook group, I hope it will be helpful to you.
Inquiry
Please leave us your requirements, we will contact you soon.