News

　　When using lifting hooks, you need to pay attention to the following details to ensure operation safety:

　　Selecting hooks: Select the appropriate hooks according to the weight, volume and shape of the goods. Make sure the hook's rated load is greater than or equal to the actual load to avoid accidents caused by overload.

　　Inspection of hooks: Before use, a comprehensive inspection of the hooks must be carried out. Check the surface of the hook for defects such as cracks, wear or deformation, which may reduce the load-bearing capacity of the hook. At the same time, check whether the connecting part of the hook is firm to ensure that it does not loosen or fall off during the lifting process.

　　Fixing of goods: Before lifting, make sure that the goods have been properly fixed. The fixing method of goods should be selected according to the characteristics of the goods to prevent the goods from shaking or sliding down during lifting.

　　Lifting process: During the lifting process, a stable speed should be maintained to avoid sudden acceleration or deceleration. At the same time, always pay attention to the status of the hook and goods. If there is any abnormality, stop lifting immediately.

　　Hook maintenance: Regular maintenance and maintenance of the hook to extend its service life. Maintenance work includes cleaning, inspection, lubrication, etc. to ensure that the hook is running in a good state.

　　Complied with safety regulations: When using lifting hooks, relevant safety regulations and operating procedures must be strictly observed. Overloading, overspeeding, and cable-stalling are strictly prohibited to ensure the safety of personnel and equipment.

　　In short, when using lifting hooks, you need to pay attention to the above details to ensure the safety of operation. At the same time, operators should also have the corresponding knowledge and skills to deal with various possible situations.

　　When using lifting hooks, you need to pay attention to the following details to ensure operation safety:

　　Selecting hooks: Select the appropriate hooks according to the weight, volume and shape of the goods. Make sure the hook's rated load is greater than or equal to the actual load to avoid accidents caused by overload.

　　Inspection of hooks: Before use, a comprehensive inspection of the hooks must be carried out. Check the surface of the hook for defects such as cracks, wear or deformation, which may reduce the load-bearing capacity of the hook. At the same time, check whether the connecting part of the hook is firm to ensure that it does not loosen or fall off during the lifting process.

　　Fixing of goods: Before lifting, make sure that the goods have been properly fixed. The fixing method of goods should be selected according to the characteristics of the goods to prevent the goods from shaking or sliding down during lifting.

　　Lifting process: During the lifting process, a stable speed should be maintained to avoid sudden acceleration or deceleration. At the same time, always pay attention to the status of the hook and goods. If there is any abnormality, stop lifting immediately.

　　Hook maintenance: Regular maintenance and maintenance of the hook to extend its service life. Maintenance work includes cleaning, inspection, lubrication, etc. to ensure that the hook is running in a good state.

　　Complied with safety regulations: When using lifting hooks, relevant safety regulations and operating procedures must be strictly observed. Overloading, overspeeding, and cable-stalling are strictly prohibited to ensure the safety of personnel and equipment.

　　In short, when using lifting hooks, you need to pay attention to the above details to ensure the safety of operation. At the same time, operators should also have the corresponding knowledge and skills to deal with various possible situations.