News

　　Since everyone knows what a hook is, you should know that a hook has many different uses of hooks. So how do you use the steel plate hook?

　　1. The steel plate hook refers to the crane staff leading the sky truck to drive the hanging beam directly above the steel plate.

　　2. The steel plate hook refers to the crane staff leading the skywheel worker to drop the hook, and stop the hook at a distance of 1.8 meters to 2 meters from the working plane on the lower surface of the hook of the beam body.

　　3. Two trainers grabbed the hook (L hook or C hook) under the hanging beam, confirmed that it was safe, and pulled it to both sides of the steel plate, and used the hook to hang the steel plate. If the steel plate is relatively wide, the huncher can direct the Tiancheman to activate the hook during the hook. When the hook is dropped, the cable craftsman should be in a safe position on both sides of the steel plate.

　　4. The steel plate hook refers to the crane staff leading the hoist to carry out lifting operations in accordance with the three steps of stretching, lifting and lifting. During the process of stretching, if you need to hold the hook, the thought worker should grasp the bracelet (the cable maker in the finished product library should grasp the outer edge of the hook and do not put his hands between the hook and the steel plate) to prevent hand clamping.

　　What are the precautions for using this hook?

　　1. Personnel are prohibited from standing under the hanging beam at any time to prevent the hanging beam from falling or suddenly falling down and injuring people.

　　2. When hanging wire ropes on the hanging beam hook, the person's body should keep a certain distance from the side of the hanging beam to prevent the hanging beam from hurting people.

　　3. During the hooking process of the craft, the lifting and lowering operation of the sky truck is prohibited. When lifting and lowering, you should absolutely follow the instructions of the hanger.

　　4. During the lifting process, the sky-trekker must not operate too much.

　　5. When thinking about removing the hook, the sky-trekker is not allowed to carry out lifting operations.

　　Since everyone knows what a hook is, you should know that a hook has many different uses of hooks. So how do you use the steel plate hook?

　　1. The steel plate hook refers to the crane staff leading the sky truck to drive the hanging beam directly above the steel plate.

　　2. The steel plate hook refers to the crane staff leading the skywheel worker to drop the hook, and stop the hook at a distance of 1.8 meters to 2 meters from the working plane on the lower surface of the hook of the beam body.

　　3. Two trainers grabbed the hook (L hook or C hook) under the hanging beam, confirmed that it was safe, and pulled it to both sides of the steel plate, and used the hook to hang the steel plate. If the steel plate is relatively wide, the huncher can direct the Tiancheman to activate the hook during the hook. When the hook is dropped, the cable craftsman should be in a safe position on both sides of the steel plate.

　　4. The steel plate hook refers to the crane staff leading the hoist to carry out lifting operations in accordance with the three steps of stretching, lifting and lifting. During the process of stretching, if you need to hold the hook, the thought worker should grasp the bracelet (the cable maker in the finished product library should grasp the outer edge of the hook and do not put his hands between the hook and the steel plate) to prevent hand clamping.

　　What are the precautions for using this hook?

　　1. Personnel are prohibited from standing under the hanging beam at any time to prevent the hanging beam from falling or suddenly falling down and injuring people.

　　2. When hanging wire ropes on the hanging beam hook, the person's body should keep a certain distance from the side of the hanging beam to prevent the hanging beam from hurting people.

　　3. During the hooking process of the craft, the lifting and lowering operation of the sky truck is prohibited. When lifting and lowering, you should absolutely follow the instructions of the hanger.

　　4. During the lifting process, the sky-trekker must not operate too much.

　　5. When thinking about removing the hook, the sky-trekker is not allowed to carry out lifting operations.