News

　　When operating the container sling, you can follow the following steps:

　　1. Check the emergency button:

　　First, check whether the emergency button of the equipment has been accidentally touched. If the emergency button is pressed, the device will stop working.

　　2. Check the solenoid valve components:

　　Check whether the solenoid valve components of the equipment are powered on. Under normal circumstances, the indicator light on the solenoid valve component will light up.

　　If the indicator light does not light, it may be abnormally damaged inside, and further investigation is required.

　　3. Use multimeter to check:

　　If the solenoid valve parts are normal but the equipment is still not working, it is recommended to use a multimeter to check the equipment in detail.

　　The multimeter can help quickly locate the specific location of the equipment damaged, so as to repair it.

　　4. Observe the operating status:

　　During the operation, pay attention to whether the device has abnormal sounds or vibrations.

　　If there is any abnormality, it may be that the internal parts of the equipment are damaged or loose, and further inspection and repair are required.

　　5. Summary and prevention:

　　If the container spreader is not working often, it is recommended to regularly maintain and inspect the equipment.

　　Abide by operating procedures and avoid equipment failures caused by human factors such as accidentally touching emergency buttons.

　　Through the above steps, the problem of the inability to work in the container spreader can be handled, ensuring the normal operation of the equipment and improving work efficiency.

　　When operating the container sling, you can follow the following steps:

　　1. Check the emergency button:

　　First, check whether the emergency button of the equipment has been accidentally touched. If the emergency button is pressed, the device will stop working.

　　2. Check the solenoid valve components:

　　Check whether the solenoid valve components of the equipment are powered on. Under normal circumstances, the indicator light on the solenoid valve component will light up.

　　If the indicator light does not light, it may be abnormally damaged inside, and further investigation is required.

　　3. Use multimeter to check:

　　If the solenoid valve parts are normal but the equipment is still not working, it is recommended to use a multimeter to check the equipment in detail.

　　The multimeter can help quickly locate the specific location of the equipment damaged, so as to repair it.

　　4. Observe the operating status:

　　During the operation, pay attention to whether the device has abnormal sounds or vibrations.

　　If there is any abnormality, it may be that the internal parts of the equipment are damaged or loose, and further inspection and repair are required.

　　5. Summary and prevention:

　　If the container spreader is not working often, it is recommended to regularly maintain and inspect the equipment.

　　Abide by operating procedures and avoid equipment failures caused by human factors such as accidentally touching emergency buttons.

　　Through the above steps, the problem of the inability to work in the container spreader can be handled, ensuring the normal operation of the equipment and improving work efficiency.