News

　　Hook is used on cranes to connect goods to vehicles. The quality of the hook directly determines whether the crane can successfully lift the goods. The quality of the hook produced by some manufacturers has not undergone strict inspection. Although the goods can be removed during use, it falls off in mid-air because it cannot bear it for too long, causing the goods to be broken, which also causes heavy losses to the construction unit. What should be paid attention to when using the hook? Let’s analyze it together.

　　1. Before use, the rated lifting weight marked on the hook should be checked and must not be less than the actual lifting weight. If there is no marking or the lifting weight marking is unclear, the rated lifting weight should be recalculated and determined through the compliance test.

　　2. Use tin oil to clean the three dangerous sections of the hook and use a magnifying glass to see if there are any cracks. For plate hooks, wear and tear of the sleeve and pin.

　　3. The surface of the hook used for lifting and hoisting operations should be smooth and should not have defects such as peeling, markings, acute angles, seams and cracks.

　　4. Check the connection part of the hook frequently to confirm whether the connection is reliable and whether the lubrication is good.

　　Hooks are generally made of steel, because the steel hooks have strong load bearing capacity. With the improvement of production technology and the requirements for steel quality gradually increase, our company's technical standards for hooks have also gradually improved. Under the premise of stable quality of the hook, other performance of the hook is improved, and the corrosion of the air on the hook is reduced, thereby improving the service life of the hook. Our company supplies hooks with reliable quality, small size, and easy to manage and maintain.

　　Hook is used on cranes to connect goods to vehicles. The quality of the hook directly determines whether the crane can successfully lift the goods. The quality of the hook produced by some manufacturers has not undergone strict inspection. Although the goods can be removed during use, it falls off in mid-air because it cannot bear it for too long, causing the goods to be broken, which also causes heavy losses to the construction unit. What should be paid attention to when using the hook? Let’s analyze it together.

　　1. Before use, the rated lifting weight marked on the hook should be checked and must not be less than the actual lifting weight. If there is no marking or the lifting weight marking is unclear, the rated lifting weight should be recalculated and determined through the compliance test.

　　2. Use tin oil to clean the three dangerous sections of the hook and use a magnifying glass to see if there are any cracks. For plate hooks, wear and tear of the sleeve and pin.

　　3. The surface of the hook used for lifting and hoisting operations should be smooth and should not have defects such as peeling, markings, acute angles, seams and cracks.

　　4. Check the connection part of the hook frequently to confirm whether the connection is reliable and whether the lubrication is good.

　　Hooks are generally made of steel, because the steel hooks have strong load bearing capacity. With the improvement of production technology and the requirements for steel quality gradually increase, our company's technical standards for hooks have also gradually improved. Under the premise of stable quality of the hook, other performance of the hook is improved, and the corrosion of the air on the hook is reduced, thereby improving the service life of the hook. Our company supplies hooks with reliable quality, small size, and easy to manage and maintain.