News

　　lifting spreader is a more common spreader that can play a certain stable role in the stressed components of the spatial structure. Given the complexity of the lifting operation process, lifting spreaders are indispensable before and during use. Many users attach great importance to the standardized operation of lifting spreaders, but ignore the storage problems after use.

　　After completing the lifting operation, the lifting sling must be put back to the storage location. If not used, it must be stored in a clean, dry, well-ventilated environment and placed on a shelf away from heat sources and gases on corrosive surfaces, and chemicals avoid direct sunlight or other strong UV rays. Check whether the steel coil spreader is damaged during use and will not store scrap steel coil spreader. When lifting, it is contaminated by acid and alkali, and can be diluted with water or mixed with the corresponding substances recommended to be stored in advance. According to the materials and related chemical properties of the spreader, or to listen to the opinions of the suppliers, this is very important for the correct storage of the coiled steel spreader.

　　In the process of using lifting and spreaders, safety factor is a very concerned issue. Doing a good job of storage after use will undoubtedly have a great impact on the improvement of its safety factor and is the key to extending its service life.

　　The above is an introduction to the storage work of lifting and slings after use. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!

　　lifting spreader is a more common spreader that can play a certain stable role in the stressed components of the spatial structure. Given the complexity of the lifting operation process, lifting spreaders are indispensable before and during use. Many users attach great importance to the standardized operation of lifting spreaders, but ignore the storage problems after use.

　　After completing the lifting operation, the lifting sling must be put back to the storage location. If not used, it must be stored in a clean, dry, well-ventilated environment and placed on a shelf away from heat sources and gases on corrosive surfaces, and chemicals avoid direct sunlight or other strong UV rays. Check whether the steel coil spreader is damaged during use and will not store scrap steel coil spreader. When lifting, it is contaminated by acid and alkali, and can be diluted with water or mixed with the corresponding substances recommended to be stored in advance. According to the materials and related chemical properties of the spreader, or to listen to the opinions of the suppliers, this is very important for the correct storage of the coiled steel spreader.

　　In the process of using lifting and spreaders, safety factor is a very concerned issue. Doing a good job of storage after use will undoubtedly have a great impact on the improvement of its safety factor and is the key to extending its service life.

　　The above is an introduction to the storage work of lifting and slings after use. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!