How to reduce the wear and tear on metallurgical lifting tool chains?
Metallurgical spreader chain is mainly composed of slings connected by metal chain links. With the increase in service life and the frequency of times, the wear of the chain becomes more and more serious, and if it is worn to a certain extent, it needs to be scrapped.
1. The tightness of the chain should be appropriate and should not be too loose or too tight. Too tightening can easily increase power consumption, the bearings are prone to wear, and too loose can easily cause skipping chains.
2. New chains cannot be mixed with old chains to avoid chain breaks during use.
3. Appropriate lubricant should be added when using it to improve work efficiency and reduce wear.
4. The length of the chain should be adjusted according to the lifting height, and no overload or overload shall be used.
The above is an introduction to how to reduce the wear level of metallurgical spreader chains. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Metallurgical spreader chain is mainly composed of slings connected by metal chain links. With the increase in service life and the frequency of times, the wear of the chain becomes more and more serious, and if it is worn to a certain extent, it needs to be scrapped.
1. The tightness of the chain should be appropriate and should not be too loose or too tight. Too tightening can easily increase power consumption, the bearings are prone to wear, and too loose can easily cause skipping chains.
2. New chains cannot be mixed with old chains to avoid chain breaks during use.
3. Appropriate lubricant should be added when using it to improve work efficiency and reduce wear.
4. The length of the chain should be adjusted according to the lifting height, and no overload or overload shall be used.
The above is an introduction to how to reduce the wear level of metallurgical spreader chains. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Metallurgical spreader chain is mainly composed of slings connected by metal chain links. With the increase in service life and the frequency of times, the wear of the chain becomes more and more serious, and if it is worn to a certain extent, it needs to be scrapped.
1. The tightness of the chain should be appropriate and should not be too loose or too tight. Too tightening can easily increase power consumption, the bearings are prone to wear, and too loose can easily cause skipping chains.
2. New chains cannot be mixed with old chains to avoid chain breaks during use.
3. Appropriate lubricant should be added when using it to improve work efficiency and reduce wear.
4. The length of the chain should be adjusted according to the lifting height, and no overload or overload shall be used.
The above is an introduction to how to reduce the wear level of metallurgical spreader chains. You can learn about it. If you have any questions and needs, you can consult and contact us at any time! You can also leave your contact information directly on the website, and we will contact you in time!
Inquiry
Please leave us your requirements, we will contact you soon.