News

　　Riches are divided into wire ropes, cable rigging and chain rigging. The structural dimensions of steel cables are standardized, generally there are single-leg rigging, double-leg rigging, three-leg rigging and four-leg rigging; it can also be said to be a single wire rope and a single-leg rigging of the same nominal size.

　　There are now three main forms: plugging, crimping and pouring. The traditional methods of manufacturing rigging mainly include casting method and welding method. There are many welding production methods, such as: friction stir welding, brazing, hand arc welding, electron beam welding, etc. In addition, the manufacturing methods of rigging joints include metal bonding, split forging and welding.

　　The loads suffered by cable joints are mainly non-stable loads, and the failure form of rigging joints is mainly fatigue failure. The fatigue damage part is the rigging joint jacket, which is prone to fatigue cracks on the outer surface and inside, and breaks are prone to occur after the cracks spread. The tongue is sensitive to stress due to stress concentration and has a small load-bearing area, which is prone to fatigue damage.

　　The above is some introduction to lifting slings. Sling joints are factors that affect the performance of lifting slings, so everyone should pay more attention when purchasing slings!

　　Riches are divided into wire ropes, cable rigging and chain rigging. The structural dimensions of steel cables are standardized, generally there are single-leg rigging, double-leg rigging, three-leg rigging and four-leg rigging; it can also be said to be a single wire rope and a single-leg rigging of the same nominal size.

　　There are now three main forms: plugging, crimping and pouring. The traditional methods of manufacturing rigging mainly include casting method and welding method. There are many welding production methods, such as: friction stir welding, brazing, hand arc welding, electron beam welding, etc. In addition, the manufacturing methods of rigging joints include metal bonding, split forging and welding.

　　The loads suffered by cable joints are mainly non-stable loads, and the failure form of rigging joints is mainly fatigue failure. The fatigue damage part is the rigging joint jacket, which is prone to fatigue cracks on the outer surface and inside, and breaks are prone to occur after the cracks spread. The tongue is sensitive to stress due to stress concentration and has a small load-bearing area, which is prone to fatigue damage.

　　The above is some introduction to lifting slings. Sling joints are factors that affect the performance of lifting slings, so everyone should pay more attention when purchasing slings!