News

Hooks are a type of sling and can be divided into forged hooks and piece hooks according to the manufacturing method. Forged hooks can be divided into single hooks and double hooks. Single hooks are generally used for small lifting capacities, while double hooks are mostly used for larger lifting capacities. Pay attention to the following when using the hook:

When the hook is used, the hook is not allowed to be used for side load, back load and tip load, as shown below:

When using a hook, the end part of the spreader should be hung into the center of the hook's force, and cannot be hung directly into the tip of the hook. When placing two slings into the hook, the angle from the vertical plane to when the slings are pulled apart cannot be greater than 45°, and the angle between the two slings must not exceed 90°.

Hooks are a type of sling and can be divided into forged hooks and piece hooks according to the manufacturing method. Forged hooks can be divided into single hooks and double hooks. Single hooks are generally used for small lifting capacities, while double hooks are mostly used for larger lifting capacities. Pay attention to the following when using the hook:

When the hook is used, the hook is not allowed to be used for side load, back load and tip load, as shown below:

When using a hook, the end part of the spreader should be hung into the center of the hook's force, and cannot be hung directly into the tip of the hook. When placing two slings into the hook, the angle from the vertical plane to when the slings are pulled apart cannot be greater than 45°, and the angle between the two slings must not exceed 90°.