News

How to use the hook set to reduce injury accidents?

When we use lifting equipment, we also need to check the lifting accessories, so that the lifting effect will be better. As one of them, the hook set plays an important role and cannot be ignored. So when using this part, what needs to be done correctly?

View More +

Official version: Precautions for using hooks

Hooks are a type of sling and can be divided into forged hooks and chip hooks according to the manufacturing method. Forged hooks can be divided into single hooks and double hooks.

View More +

Explain the technical requirements and scrapping of hooks

翻译错误：Unexpected character encountered while parsing value: <. Path '', line 0, position 0.

View More +

Crane hook disassembly, maintenance and load test technology

1〉Removal of the hook ① Unscrew the bolts 24 at both ends and remove the fixed axis plate 26. ② Remove nuts 11, washers 12 and bolts 10. ③Remove the tie plates 5 on both sides of the beam 2. ④Remove the nuts 22 and bolts 21,

View More +

When the hook is placed in the lowest position, why should the wire ropes on both sides of the drum

Because the end of the wire rope is fixed on the drum by the pressure plate, in order to prevent the wire rope from being pulled out from under the pressure plate due to excessive pulling force or breaking the pressure plate screws and causing accidents s

View More +

Introduction to safety matters for using the hook set

The hook group is a very important lifting and spreader. It is generally used in various large-scale industrial processing sites and is of great significance to modern operations. Next, let’s take a look at the introduction about lifting hooks: The hook g

View More +

Danger of moving the lifting hook in the wrong direction

Running the lifting hook in the wrong direction may cause the following dangers: Load loss or falling off: If the hook runs in the wrong direction, the load may be lost or fallen off, causing damage to items, injuries, or accidents. Structural damage: Wro

View More +

The composition and classification of crane hook groups

As an important part of crane lifting, the hook group is composed of what exactly? Crane hook composition: Generally speaking, the hook group consists of: hook, hook beam, thrust bearing, pulley, pulley shaft, pull plate and pulley cover and other parts.　

View More +

Types and material characteristics of hooks

The hook factory divides the hooks into single hooks and double hooks according to their shapes: single hooks are divided into short (A) type and long (B) type. The only difference between the two is the length of the hook body. A balance pulley is instal

View More +

Reasons why the brake of the lifting mechanism of QD type hook bridge crane often burns the coil

The rated lifting capacity of QD type hook bridge crane is 5t. The brake of the lifting mechanism is TJZ-200 short-stroke AC electromagnet block brake. TJZ-200 short-stroke AC electromagnet block brake

View More +

How to determine whether the hook of a hand chain hoist is scrapped

The hook is a type of sling and can also be used as an important accessory of the chain hoist. The degree of damage to the hook determines whether it needs to be scrapped, and there are certain criteria for judgment.　

View More +

How can the bearings of semi-enclosed hook sets perform better?

Lifting equipment is equipped with many components, one of which is a very important one is the semi-enclosed hook group. Its role is great and it has a great impact on the use of the equipment. Maybe some people don't understand this, let's find out to

View More +

When using lifting hooks we need to pay attention to regular inspections

Cranes are used more and more in our work. They are mainly used for loading, unloading and transporting goods. The lifting hook is a major component of the crane. The lifting hook is hung on the crane with the help of pulleys and other crane accessories.

View More +

Which specification of the hook used on the crane is safer?

A crane is a tool for lifting materials and plays a very good role in daily transfer of heavy objects. The hook is one of the important components of the crane. There is also a demand for hook varieties. How should we choose? 1. The hook of the crane is d

View More +

As a lifting equipment accessory, hooks are often used in conjunction with cranes

The hook is an important industrial lifting accessory and is widely used in various processing and transportation fields. Now there's a smart hook that makes lifting heavy objects safer. This new hook is equipped with a measuring device. Let's take a lo

View More +